Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
^this^ Except if you are using Essence as your finishing polish and CQuartz as your LSP. Essence acts like a primer for CQuartz and thus no need for a alcohol/Eraser wipe down.The purpose of a glaze is to help hide/fill imperfections in order to create a smooth and glossy surface. In order to do this, a glaze must leave behind residue that can fill in these imperfections. You will notice on the CarPro instructions for applying CQuartz and CQuartz UK, it specifically states that you need to use CarPro Eraser to remove all remaining oils from the surface after polishing..... this means that using a glaze prior to applying a coating is not the proper choice of products. You should correct the paint as needed to truly remove surface imperfections, or at the very least use a fine polish to ensure the surface is clean. Follow the polishing process with an alcohol/eraser wipe and then apply your coating.
^this^ Except if you are using Essence as your finishing polish and CQuartz as your LSP. Essence acts like a primer for CQuartz and thus no need for a alcohol/Eraser wipe down.
FWIW - Essence relies on a certain amount of heat buildup to break down the oils in the polish (so I have been told) and therefore if Essence is used in a manner that does not generate enough heat (<- though I have never been told what quantifies "enough") it can interfere with the coating. For that reason, since we enjoyed using Essence as a finishing polish, we would still make it a habit to do an Eraser wipe after using Essence unless we were working on one of those cars with paint so soft that just giving it a dirty look would mar it.
Coatings are such a limited use product, you need to figure out if the risk of them not bonding properly to a fully prepped and oil free surface is worth the cost without that prep work. That being said, I've used CQuartz UK over top of fresh CG Glossworkz glaze, as well as over fresh Pinnacle Souveran and I have not noticed any negative impact or noticeable difference in the behavior in the short term (2 months) compared to using it over Essence(without Eraser) or 3D HD Polish(with Eraser). The biggest performance impact I've seen was using it on top of a surface that while decontaminated, had not been polished with abrasives in a while.