Was doing some polishing this weekend when I accidentally set the Porter to 4.
Imagine my surprise when I got almost no rotation at all when the pad was placed on the car surface.
Is a problem running a low speeds common to all Porters?
The Porter Cable orbital polisher is not the most powerful in its class, the Griot's takes first prize for power.
I worked with an Engineer for Black & Decker, he was on the Petersen Museum episode of our TV show but I know him from him attending years of the TNOGs I started and led for Meguiar's back in Irvine, California.
I asked him once if he could pass on some suggestions to the Porter Cable division and he said he could try but to paraphrase, he said they wouldn't care about any suggestions to improve the tool and wouldn't implement any either.
They sell jillions of these things as both wood sanders and car polishers and don't care about what we the masses think.
Here's the deal though, they could improve the tool with a few simple changes,
1: More power. How much could it cost on a global scale to increase the power?
2: More accurate speed controller to interface between the motor and the speed dial. Each turn of the speed dial should increase or decrease the motor speed. If you check your PC you'll see that from the range of 3-5 there's very little felt or heard difference.
3: A speed dial that clicks into place, can't think of the word right now but instead of smooth rolling dial I'd prefer one that ratchets or clicks from one speed to the next so it remains in the speed selected.
The Porter is a workhouse at 5 or higher, but no so much when you go below that.
Like I've been posting for years...
Millions of cars have been de-swirled using any version of the Porter Cable 7314, 7336 and now the 7424XP
And because I plan on applying LSP by machine, this is important. I would think I need to apply that stuff at 4.
When machine applying a FINISHING wax or sealant, (that means an NON-cleaning wax or sealant, you don't need pad rotation as you're NOT trying to remove defect but merely spread out a uniform layer of product over the surface.
Specifically on the Porter Cable polishers you need to be on the 4 to 5 setting ONLY because a rotating pad glides better and easier over paint than a vibrating pad. (try it and see)
When applying a CLEANER/WAX that is when you're trying to remove defects, (remove paint), now you need to max out the PC and go with speed 6 to maintain pad rotation under pressure and over irregular shaped body panels.
Would the Griot solve this problem? It's on sale although the 5" backing plate is extra (I have mostly 5.5 pads).
Yes.
Speed 3 on the Griot's is like speed 6 on the Porter Cable. I might be exaggerating a little but not by much.
The Griot's has tons more usable power to maintain pad rotation when using compounds, polishes and cleaner/waxes.
When machine applying a finishing wax you only need speed 2
I would recommend the Griot's over the PC any day to anyone wanting to detailing their own cars or get started detailing cars for money.
I would also recommend getting the 5: backing plate so you can turn and churn 5.5" foam and microfiber pads.