The Rag Company edgeless

Jim w

New member
Joined
Dec 7, 2015
Messages
310
Reaction score
0
TRG is having a sale on their 350,380, and 500.
I have 10 of the 500 and would like to pick up
some more of the 350. Then I see 380 minx. Would
I be better served with just the 350 or would
you pick up the 380 minx as well? Help me make
up my mind.
Thanks
Jim
 
I would skip the minx. Was one of the worst towels I used. Just pushed water or product around. Good thing I only bought one to test.
 
I haven't tried the Minx but I would take Guz's advice. I do like the Eagle Edgeless for detail spray touch ups. Make sure that you wash them first before you use them.
 
I would get the yellow edgeless 500's for 3 dollars a piece. That's cheaper then what you pay when you buy 100 of them. If I didn't have so many I would be all over that.

I buy 25 at a time.
 
I would skip the minx. Was one of the worst towels I used. Just pushed water or product around. Good thing I only bought one to test.

Yeah the yellow ones are better they have a higher GSM. It's a nice final buff towel. I never tried drying with it. Its basically fleece like a jacket.
 
I would get the yellow edgeless 500's for 3 dollars a piece. That's cheaper then what you pay when you buy 100 of them. If I didn't have so many I would be all over that.

I buy 25 at a time.

Funny you mention this....... These are my next MF buy. Lol
 
Funny you mention this....... These are my next MF buy. Lol

Thats a great price. They are at least 4 dollars each even if you buy 50. Thats the cheapest Ive seen them. The yellow ones are nice and plush too.
 
Yeah the yellow ones are better they have a higher GSM. It's a nice final buff towel. I never tried drying with it. Its basically fleece like a jacket.

Good way to put it. Well I tried it using the minx with a drying aid and it was not the best towel for that. I ended up using for door jambs and the engine bay.

The edgeless 350 and 500's are better at this task.
 
Good way to put it. Well I tried it using the minx with a drying aid and it was not the best towel for that. I ended up using for door jambs and the engine bay.

The edgeless 350 and 500's are better at this task.

Yeah I find a lot of the towels will drag if they are not very saturated. Then that drag pulls all the fibers out. I hate that.
 
Would I be better served with just the 350
or would you pick up the 380 minx as well?

Help me make up my mind.
I personally believe that you’d be better
served by going with just the 350s.

Hope this helps.


Bob
 
Just curious. What task do you use your 500 and 350 for?
I thought I would use my 350 for removing wax or sealant
and 500 for final wipe. Open to suggestions.


HAPPY THANKSGIVING TO MY OTHER FANILY HERE.


Thanks
Jim
 
For sealants and polish I use the Cobra Jrs Gold Plush, Purple Cobras and the Eagle Edgeless 365 70/30 low pile.
I might break out one or the other you listed for a final once over.

Not much help there, am I.
 
Just curious. What task do you use your 500 and 350 for?
I thought I would use my 350 for removing wax or sealant
and 500 for final wipe. Open to suggestions.


HAPPY THANKSGIVING TO MY OTHER FANILY HERE.


Thanks
Jim
Well nothings really set in stone as I'm still not satisfied on some tasks and towels but I use the 350's for panel wipe, I use the 500's for (final buff) on everything from waterless washing to final drying after a bucket wash, to final buff after applying products from simple detail spray to spray on coatings and paste/liquid wax. I have and use all 5 colors except red. Again I have way more than I probably "need".


I feel like I should add that the plush towels are certainly not the best at every task. Sometimes the plushness is a negative cause it can create drag. Especially if you're trying to apply something light. I don't have it all figured out yet.
 
Thanks, fightnews it's the task best suited for
these towels, is just what I'm looking for. Thank
you.

Jim
 
Thanks, fightnews it's the task best suited for
these towels, is just what I'm looking for. Thank
you.

Jim

Thanks, Yeah I use the rag company 420 for waterless wash then the 365 and 300 gsm 70/30 edgeless towels for any type of polish and wax removal. Even spray wax/coating type products. Again you can use a 500 for a finial once over on that too.

I dabble in other towels too like the carpro no lints that I like but I feel you can do everything with rag company towels if you don't want to make it complicated and spend a lot of money. Stay edgeless

I use there 245's for glass and all purpose they have 10 colors so.
 
Thanks wing commander. I haven’t seen
these towels before, they look interesting.
Now I have those to think about. Thanks I think.

Fightnews, thanks again for your help.

I think I have an addiction to micro fiber.
I have all I need but am always looking.

Jim
 
Back
Top