Cquartz issue?

C

Chrisong

New member
Joined
Jul 19, 2019
Messages
16
Reaction score
0
I applied cquartz uk3.0 about a week ago but now I notice these spots near the headlights (as circled in white). Pardon the water spots as well cause have yet to wash car :)

I did the usual methods prior to coating. Wash decon polish ipa then coating. To my memory I did not notice these spots when I apply.

At certain angles they are not visible. Tried mf cloth to gently rub but unable to.

Any idea what might these be? And how to remove?

TIA!
787cb87e23f6a62361740fba37345651.jpg
f55d4f6c6e6448a625958984a11fa9c7.jpg
30cd9d1f8527a1c8f2219a7cdde93e64.jpg


Sent from my LIO-L29 using Autogeekonline mobile app
 
Looks like you need to just hand polish a little bit, could be left over coating you failed to wipe off during the installation process
 
BSoares said:
No, polish, wipe with Eraser, then coat again. I haven’t had luck with blending and just opt to do the whole panel that requires the work.
Click to expand...

Second the whole panel. Spot fixing doesnt work


Sent from my iPhone using Tapatalk
 
To me that almost looks like dried liquid soap stain that didn't get rinsed fast enough, I've had similar things
that look like that when I leave soap or other liquids on the paint for too long it almost stains it in a way kinda hard to explain.
But like others said ipa, polish, coat etc again should be fine.
 
If you don't want to do the entire hood, I've had good luck with taping off a square section around it and then just doing that section.
 
Did a quick polish with applicator and ipa follow by touching up the cquartz. Looks fine as of now. Hopefully no diff when the cquartz cured
7f7cb7b20d65f86dc77dabc3fca29e06.jpg
57a10f8e198539258e8d678d7d33b514.jpg


Sent from my LIO-L29 using Autogeekonline mobile app
 
You must log in or register to reply here.
Back
Top