2010 Honda Pilot with clear coat issues?

TrustJesus

TrustJesus

New member
Joined
Apr 12, 2020
Messages
535
Reaction score
0
So, this truck belongs to a member of our family. I actually picked it up from dealer, it was clean no issues. Then out of a sudden it has this clear coat issue front right tire panel. She has no “idea” what happened to it.

I tried washing it nothing
Clay bar nothing
Water spot remover nothing
Iron remover nothing
Wax nope

It’s not over clear coat, it’s actually through it? I have not tried machine polishing it, would it work? I’m dumbfounded lol







View attachment 70084


Sent from my iPhone using Autogeekonline mobile app
 
TrustJesus said:
So, this truck belongs to a member of our family. I actually picked it up from dealer, it was clean no issues. Then out of a sudden it has this clear coat issue front right tire panel. She has no “idea” what happened to it.

I tried washing it nothing
Clay bar nothing
Water spot remover nothing
Iron remover nothing
Wax nope

It’s not over clear coat, it’s actually through it? I have not tried machine polishing it, would it work? I’m dumbfounded lol







View attachment 70084


Sent from my iPhone using Autogeekonline mobile app
Click to expand...
Looks like a bird dropping that etched the paint. I think polishing would work and remove it. Least aggressive to most aggressive and check how much clear coat is on the vehicle, if you can.

Sent from my SM-N960U using Autogeekonline mobile app
 
@DETAILROOKIE I figured it was that, but I was not sure. Honestly I don’t have a paint thickness gauge. Being a Honda, you all think I should be ok to try to polish, I have a 3” polisher with Griot Garage complete polish


Sent from my iPhone using Autogeekonline mobile app
 
I would try with an aggressive foam pad and an aggressive leveling fluid. If that doesn't work, leave it be.
 
Very lightly go over it with a heat gun. Don't "burn" the paint of course, but warm it up a bit. On low, very slowly and carefully. Don't press on it or touch it, but do stop for a few seconds and take care not to over heat the panel. You just let the heat warm it up a bit, then cool a bit, repeat, etc. and it should begin to fade. I've done it a few times and it works perfectly.

How to Remove Bird Poop Etchings with JUST HEAT - YouTube
 
I’ll give it a try, I’m looking forward to trying to get it back to normal. Thanks fellas


Sent from my iPhone using AGOnline
 
Tim, would a hair dryer work or a heat gun work? I don’t have a heat gun, I know there cheap but just wondering


Sent from my iPhone using AGOnline
 
If it still remains i would try going over it with 3000 grit and buff it, sometimes can be less aggressive then
trying to compounding it really hard. Sometimes they get so etched in there you have to sand level.
 
You must log in or register to reply here.
Back
Top