bbmach
New member
- Dec 28, 2021
- 96
- 0
View attachment 74925View attachment 74926View attachment 74927
I’ve been lurking, reading, learning and other “ings” here for a while as I do research.
I know I am overthinking my project, hence this long post, but wanted to get a few opinions on my thought process/approach before I tackle it.
My black Buick GS was repainted with single stage urethane back in 1998. It’s been garage kept since, with “nice-day” type outings. My parent’s bought it new, so I am awfully familiar with the car (used it to get my driver’s license).
My Dad fell ill about 10 years ago, and GS became mostly a garage queen… except when I was able to visit and take care of needed things.
I now have the car with me and have spent the last two years taking care of the usual things that need attention after sitting a while, and am now ready to tackle the paint before spring. It’s not bad, but it’s been at least 10 years since it’s seen anything other than a duster, various spray detailers (Meguiar’s – Griots, etc), and the inside of a car cover.
It still looks quite nice with good reflections and shine, and I get compliments on the paint almost every time it’s in public, but it has some swirl marks here and there, and a few rub marks that need to be addressed. I also need to wet-sand two spots I have layered on touch up paint.
After having my own restoration shop (mostly mechanical), I took a 20-year detour into the corporate world – an amazing experience but little work/life balance – and now getting back into my cars. I recently picked up a DeWalt DA, fresh Griot’s Clay, and various Chemical Guys pads. I bought 3M Finesse It II Machine Polish and Show Car Liquid Wax to supplement my older (in some cases much older) collection of Eagle One Nano wax and Carnauba paste wax, Zymöl Cream and Cleaner wax, and other assorted bottles of “stuff” such as Meguiar’s Final Inspection, Ultimate Polish and various detailers like Ultimate Waterless Wash and Wax, Ultimate Quik Detailer, and Quik Detailer Mist and Wipe.
I experimented on my and my wife’s daily drivers, using different products above, and am happy with both cars. I went gentle – I believe the strongest polish I have is the 3M – and found a second round a few months later with the clay and a just cleaner wax (the Zymöl) made an improvement. I know there are better options, but it is what it is for the DD’s, at least until I empty some of the bottles I already have (or they aren't effective any longer).
TL;DR
I am still a bit old-school and want to stay away from ceramic coatings at this time and am looking for the “deep wet look” vs super shiny.
My current thinking for the Buick:
Clay – Polish the specific spots that need extra attention with either the 3M Finesse It or Meguiar's Ultimate Polish (or something stronger, as needed), then do the whole car before using the 3M liquid wax or Eagle One paste wax.
OR
Clay. And then pick up specific pairings such as:
Please Note – I am note asking which is “better,” just more about which groupings would be the right amount of polish to get after the swirl and rub marks… From everything I’ve learned so far, I don’t suspect I could go wrong with any of the above… but appreciate opinions on who has used what, and what has worked for them, in similar situations.
Mucho TIA!
I’ve been lurking, reading, learning and other “ings” here for a while as I do research.
I know I am overthinking my project, hence this long post, but wanted to get a few opinions on my thought process/approach before I tackle it.
My black Buick GS was repainted with single stage urethane back in 1998. It’s been garage kept since, with “nice-day” type outings. My parent’s bought it new, so I am awfully familiar with the car (used it to get my driver’s license).
My Dad fell ill about 10 years ago, and GS became mostly a garage queen… except when I was able to visit and take care of needed things.
I now have the car with me and have spent the last two years taking care of the usual things that need attention after sitting a while, and am now ready to tackle the paint before spring. It’s not bad, but it’s been at least 10 years since it’s seen anything other than a duster, various spray detailers (Meguiar’s – Griots, etc), and the inside of a car cover.
It still looks quite nice with good reflections and shine, and I get compliments on the paint almost every time it’s in public, but it has some swirl marks here and there, and a few rub marks that need to be addressed. I also need to wet-sand two spots I have layered on touch up paint.
After having my own restoration shop (mostly mechanical), I took a 20-year detour into the corporate world – an amazing experience but little work/life balance – and now getting back into my cars. I recently picked up a DeWalt DA, fresh Griot’s Clay, and various Chemical Guys pads. I bought 3M Finesse It II Machine Polish and Show Car Liquid Wax to supplement my older (in some cases much older) collection of Eagle One Nano wax and Carnauba paste wax, Zymöl Cream and Cleaner wax, and other assorted bottles of “stuff” such as Meguiar’s Final Inspection, Ultimate Polish and various detailers like Ultimate Waterless Wash and Wax, Ultimate Quik Detailer, and Quik Detailer Mist and Wipe.
I experimented on my and my wife’s daily drivers, using different products above, and am happy with both cars. I went gentle – I believe the strongest polish I have is the 3M – and found a second round a few months later with the clay and a just cleaner wax (the Zymöl) made an improvement. I know there are better options, but it is what it is for the DD’s, at least until I empty some of the bottles I already have (or they aren't effective any longer).
TL;DR
I am still a bit old-school and want to stay away from ceramic coatings at this time and am looking for the “deep wet look” vs super shiny.
My current thinking for the Buick:
Clay – Polish the specific spots that need extra attention with either the 3M Finesse It or Meguiar's Ultimate Polish (or something stronger, as needed), then do the whole car before using the 3M liquid wax or Eagle One paste wax.
OR
Clay. And then pick up specific pairings such as:
- · Meguiar’s Ultra Pro Finishing Polishing and Mirror Glaze Synthetic Sealant 2.0
- · Griot’s Boss – Correcting Cream and Finishing Sealant
- · Blackfire One Step and Midnight Sun
Please Note – I am note asking which is “better,” just more about which groupings would be the right amount of polish to get after the swirl and rub marks… From everything I’ve learned so far, I don’t suspect I could go wrong with any of the above… but appreciate opinions on who has used what, and what has worked for them, in similar situations.
Mucho TIA!