Cure time for Gyeon Cancoat EVO

I’m thinking of trying out Cancoat EVO (been using Polish Angel Master Sealant) but had a question about the curing time. It’s been said it needs 12 hrs to cure. Does that mean I shouldn’t take it outside into the elements/sunlight for 12 hrs or just not let it get rained on for 12 hrs? Thanks


Sent from my iPad using AGOnline

The Guz said:

Straight from Gyeon's site. Put Cure on it after application to protect the coating.

All EVO formulas can be applied outdoors. Ensure stable conditions, never use in direct sunlight and check the weather forecast! The coating should not get wet in the first 12 hours after application.

Click to expand...

I figured it was not get it wet for 12 hrs. When I use Polish Angel Master Sealant, Ive read not to take it outside for a minimum of 2 hrs in direct sunlight so it can cure some. So if I let Cancoat cure for a couple of hrs indoors and then take it outside (aside from it getting rained on that it is for 12 hrs) I should be good? Thanks for your reply Guz.


Sent from my iPad using AGOnline