PDA

View Full Version : Need help - scractches still present after SIP & 106FF -> Pics inside


alowe
10-12-2008, 02:24 PM
So I just spent 3 hours going over my wifes 06 Explorer with SIP & CSS white, followed by 106FF &white CSS. SIP cleared most of the scratches, did 2 passes. Left hologramming as well. Followed by 1 pass of 106FF. Topped with Wolfgang DGPS. After close inspection, there are still scratches visible. Should I have stepped to SIP on an Orange?

Pics:
http://i251.photobucket.com/albums/gg304/Alowe35/IMG_0491.jpg
http://i251.photobucket.com/albums/gg304/Alowe35/IMG_0493.jpg
http://i251.photobucket.com/albums/gg304/Alowe35/IMG_0494.jpg
http://i251.photobucket.com/albums/gg304/Alowe35/IMG_0495.jpg
http://i251.photobucket.com/albums/gg304/Alowe35/IMG_0496.jpg
http://i251.photobucket.com/albums/gg304/Alowe35/IMG_0497.jpg

Respect,

Andrew
Old Pirate
10-12-2008, 03:01 PM
Which machine are you using ? And i would go with orange pad with SIP first.
alowe
10-12-2008, 05:14 PM
Sorry, it was with a UDM, on six. SIP really powedered for me also.
Old Pirate
10-12-2008, 05:22 PM
Then use a orange pad and work a 2 x 2 area for about 4-6 mins. It will kick up dust but keep at it. You might have to do 2 or 3 passes on it before you will notice that the swirls are remove , then go to 106FF with a white pad maybe 2 passes also. let us know on how it turn out.
ScottB
10-12-2008, 06:00 PM
orange/sip then white/sip then grey/nano are usually all thats needed.
Rsurfer
10-12-2008, 08:29 PM
Hope it works out. Next time take it in the sun before sealing.
alowe
10-13-2008, 04:05 AM
Thanks fellas. I only worked 2x2 for about 2 minutes. I guess I need a longer working time.
Old Pirate
10-13-2008, 06:49 AM
Hope everything works out and let us know on how it turn out!
Showroom Shine
10-13-2008, 10:12 AM
orange/sip then white/sip then grey/nano are usually all thats needed.
Also if it does not give you the desired results the first pass, you can always do another pass.