Wipe-down after Polishing/ Compounding:
This allows you to inspect the surface to determine if the surface is defect free or if further work is required. When polishing or compounding to remove fine swirls or holograms, it's easy for residues to settle in the swirls, hiding the true paint finish. Wiping the finish with a Micro fibre cloth you may feel that the swirls have been removed, only to have them reappear when applying the final wax or sealant. After polishing a section, mist and wipe to fully remove residues and reveal the true paint finish.
1.Polymer sealants - will not form a proper monocular bond with a paint surface if there are any oils present and it will affect durability.
2.Silicone will cause surface smearing and will affect durability
a) Isopropyl alcohol (IPA) - fill a fine misting spray bottle with a 8:1 ratio of Isopropyl alcohol (IPA) / distilled water solution spray the paint surface, leave it to dwell for 30-45 seconds, agitate before wiping the paint surface with a clean, dry 100% cotton towel
b) Menzerna Top Inspection (PP95) – use to inspect your work, use this water-based cleaner that removes dust left by compounding and any lubricating oils so you can see the real results of your work. There are no silicones or fillers, just gentle cleaning agents to uncover the real condition of your vehicle’s paint.
c) Hi-Temp's Prep Wash - to prepare a paint surface for polishing, compounding, wax and / or polymer sealant application (especially if changing from a wax to a polymer product) this is a water-based paint cleaner designed to remove all traces of silicone, oil, and buffing residue from any exterior paint surface
d) DuPont PrepSol II™ - http://www spray onto a 100% cotton...ed articles dedicated to automotive detailing