test panel

rogertheracer

New member
Joined
Sep 19, 2008
Messages
17
Reaction score
0
i have been test detailing this one area with little results.
i now want to do the same area with a different approach.
do i clay this area to remove last test products .
i want to test the same area.

thanks
 
silver metallic, cc , not a daily driver
trying to remove dull area ( i think from not buffing paint out all the way )
cannot see outside in sun light but can see inside at certain views.

i clayed first , then used colorx , then moved over and used swirlx
this was all done by hand , my polisher should arrive tomorrow!!!!
im getting ccs pads orangs,white,grey,blue. which to use with what ??
i have colorx, and swirlx, nxt2.0 wax

thanks, roger
 
Use some Menx, or Meguiars Ultimate or 105 and step down from there.

Better measure the Paint Thickness or you may run out of Clearcoat and be one unhappy camper!
 
If I Use Swirlx , What Pad Should I Use ?
Im Trying To Sneak Up On It.
Im In No Hurry, Even If I Have To Do It Several Times With Swirlx.
Like U Said , Dont Want To Run Out Of Cc !!

Thanks , Roger
 
Any chance you get get some pics so we can better help you out?

SwirlX will remove light swirls with a polishing pad on most paints. What polisher did you order?
 
I Ordered The Meg.g110 Complete Kit.

So I Could Use The Orange Pad With The Swirlx For Starters ?

If That Works, Then Finish Up With A White Pad?

This Is Not The Whole Car, Just 2-3 Places.

Outside The Silver Bright, Cannot See The Spots.

Thanks
 
I Ordered The Meg.g110 Complete Kit.

So I Could Use The Orange Pad With The Swirlx For Starters ?

If That Works, Then Finish Up With A White Pad?

This Is Not The Whole Car, Just 2-3 Places.

Outside The Silver Bright, Cannot See The Spots.

Thanks

SwirlX is really more of a light polish. The Orange pad is a cutting pad and I'd use that with M105 or similar compound and then follow it up with SwirlX on a white pad. Maybe Try SwirlX with the white pad first though.
 
Back
Top