Edge Wave Foam Pads

V

vipervin

New member
Joined
Feb 12, 2011
Messages
3
Reaction score
0
How do you properly use the Edge 2000 wave foam pads? I bought one pad for my 7424 and noticed it doesn't actually rotate when I am applying the polish on the paint. It just seems to vibrate as I move across the panel. The original flat pads work pretty well and do spin. Is this normal for the wave pads?


yellowwaffle.jpg
 
:welcome:To Autogeek Online!

If too much pressure is applied than you'll stop the pad rotation. With a permanent marker draw a line on the back of the pad to make it easier to see if the pads rotating. Try easing up on the downward pressure and see if this helps.
 
BobbyG said:
:welcome:To Autogeek Online!

If too much pressure is applied than you'll stop the pad rotation. With a permanent marker draw a line on the back of the pad to make it easier to see if the pads rotating. Try easing up on the downward pressure and see if this helps.
Click to expand...

The thing is... I am not putting any pressure at all ! Just the weight of the PC alone is causing the pad to stop rotation. I have to physically lift the PC up slightly to make it rotate. ...now that can't be right.
 
What speed are you running the PC at? Should be 6.
 
kronos said:
What speed are you running the PC at? Should be 6.
Click to expand...

I am using Klasse AIO and I thought I remembered reading somewhere to use speed 4. But I will give 6 a try, thanks for the tip!
 
You must log in or register to reply here.
Back
Top