Jewelling - Definition

[Mike Phillips]

Jewelling - Definition (http://www.autogeekonline.net/forum/auto-detailing-101/37767-jewelling-definition.html)



This 1949 Chevy Sedan Delivery was Jewelled using only a Rotary Buffer
Bumblebee - Testing out the NEW DeWALT DWP849X (http://www.autogeekonline.net/forum/off-topic/37831-bumblebee-testing-out-new-dewalt-dwp849x.html)
http://www.autogeekonline.net/gallery/data/1202/49SedanDelivery0042.jpg



How to Jewel Paint using a Rotary Buffer
[ame=http://www.youtube.com/watch?v=V4PQfiXJLIc&hd=1]How to Jewel Paint using a Rotary Buffer - YouTube[/video]




Jewelling
Jewelling is a term for what I always called finish polishing, both terms mean to bring the paint to the highest degree of gloss, shine, depth, reflectivity etc. and this is done by making the paint as perfectly flat as possible at the microscopic level.

Just to make sure there's no confusion, when I use the word flat I don't mean as in dull or matte, I mean as smooth and equal in surface level, as in perfectly flat like the surface of a glass window. The car body panel itself can be curved but the paint on the curved panel must be perfectly flat and smooth.

I personally like the term jewelling better than finish polishing because the word jewel conjures up a picture in your mind, or the idea of a highly polished gemstone that glistens when light reflects off its surfaces.

A few years ago when the term jewelling reached the tipping point and became a commonly used term on detailing discussion forums I posted a request to one forum and asked for a volunteer to write an official definition for the term.

To this date I have not found an official definition written as such by anyone. So after waiting for a few years I'll volunteer to take a stab at it.


Jewelling - Definition
The final machine polishing step in which an ultra soft foam finishing pad with no mechanical abrading ability, (in and of itself), is used with a high lubricity ultra fine finishing polish to remove any remaining microscopic surface imperfections out of an automotive paint finish.

This step is performed after the paint has been previously put through a series of machine compounding and polishing procedures to have already created a near perfect finish.



Open to suggestions to tweak the definition and perfect it and standardize it for the detailing industry.

Also just want to add that while in most cases jewelling is the last step after a series of previous compounding and polishing steps, it is also possible to start with a near perfect finish. For example, at some other time the paint was already compounded and polished but needs to be refreshed to restore perfection.




1949 Chevy Sedan Delivery - Swirls removed and show car finish by Mike Phillips

http://www.autogeekonline.net/gallery/data/1202/49SedanDelivery0043.jpg

http://www.autogeekonline.net/gallery/data/1202/49SedanDelivery0046.jpg


http://www.autogeekonline.net/gallery/data/1202/49SedanDelivery0050.jpg
Bumblebee - Testing out the NEW DeWALT DWP849X (http://www.autogeekonline.net/forum/off-topic/37831-bumblebee-testing-out-new-dewalt-dwp849x.html)



:)

[rwright]

That's a great definition Mike, I'm surprised it hasn't been defined "officially" before. :applause:

[Mike Phillips]

That's a great definition Mike, I'm surprised it hasn't been defined "officially" before. :applause:

It may be officially defined, I just haven't found it defined anywhere. If you or anyone finds an official definition on a website or on a forum let me know as my posting history shows me to do my best to give due credit to where credit is due.

:)

[rwright]

You've been on forums way longer than I have, so if you haven't seen it then I highly doubt I will! I have no doubts in your word :props:.

[Mike Phillips]

I think I first read the term from Todd Helme on MOL a few years ago and I've read where he posted he picked it up from others. I found another thread where a forum member said the term goes back to the 1940's and 1950's but I've still never found an official definition.

I want to use the term for an article I'm writing but want to start by having a clear definition and since I couldn't find one I wrote one.

I know I asked someone else that was talking about the term to write the definition but can't find the thread.

:)

[96Lude]

Also just want to add that while in most cases jewelling is the last step after a series of previous compounding and polishing steps, it is also possible to start with a near perfect finish. For example, at some other time the paint was already compounded and polished but needs to be refreshed to restore perfection.

Mike, when you mention previous polishing steps, does that include removing any light holograms or buffer trails? Or is that reserved for the jewelling step?

Also, most people usually mention jewelling with a rotary. In my mind, this means you risk causing new holograms.

[Flannigan]

Sounds good. Isn't it usually associated with low RPM's too?

[CleanGene]

Sounds good to me, Mike.

[dreamps]

awesome article MP! i was expecting a list of your fav pads/products combo for jeweling!

[mbkite]

I think asfault rocket vette was jeweled
and i think thats where i first heard the term.

[detail man]

I have been using this term for as long as I can remember. I would always explain to my customers jeweling was like taking the finest jewelers rouge available and going over and over the surface bringing out max shine and mirror like finish until it was achieved

[Mike Phillips]

I have been using this term for as long as I can remember. I would always explain to my customers jeweling was like taking the finest jewelers rouge available and going over and over the surface bringing out max shine and mirror like finish until it was achieved


What do you think of the definition?




Jewelling - Definition
The final machine polishing step in which an ultra soft foam finishing pad with no mechanical abrading ability, (in and of itself), is used with a high lubricity ultra fine finishing polish to remove any remaining microscopic surface imperfections out of an automotive paint finish usually after the paint has been previously put through a series of machine compounding and polishing procedures to create a near perfect finish to start with.




Would you add, remove or change anything?


:)

[Barry Theal]

Maybe we should ask Todd Helme. Wasn't hey the one who coined this term years ago?

[mark58]

Jewelling - Definition
The final machine polishing step in which an ultra soft foam finishing pad with no mechanical abrading ability, (in and of itself), is used with a high lubricity ultra fine finishing polish to remove any remaining microscopic surface imperfections out of an automotive paint finish usually after the paint has been previously put through a series of machine compounding and polishing procedures to create a near perfect finish to start with.




OK now we have a definition! So what products would you suggest for this process?:buffing:

[Mike Phillips]

Maybe we should ask Todd Helme. Wasn't hey the one who coined this term years ago?

I found a couple of threads where he stated he didn't coin the term or I would have given him credit. I do believe he helped to make the term popular, that was the tipping point reference.

I think I pointed this out in a previous post in this thread... see post #5 (http://www.autogeekonline.net/forum/auto-detailing-101/37767-jewelling-definition.html#post493936) on the first page of this thread. I'm pretty good about giving due credit where credit is due after having stuff I've written over the years lifted with no credit ever given to me, so I do try to take the high road.

:)