Menzerna

P1et

In time out
Joined
Jul 31, 2006
Messages
2,894
Reaction score
0
I've been reading some great stuff about Menzerna polishes.

1) Are there plans for AG to add this product to their line-up as a high-end polish?

2) I am looking for a very fine finishing polish and am looking at PO85RD or 106FF. If they are 1.5 / 5 and 2.5 / 5 respectively on the abrasiveness scale, where can I put SSR1?
 
P1et said:
I've been reading some great stuff about Menzerna polishes.

1) Are there plans for AG to add this product to their line-up as a high-end polish?

With all the commotion this Menzerna has caused I'm really interested on the feed back you are going to get with the first question. Sounds like a good product, I'd be willing to spend the extra cash for this product if AG choose to stock it.

Looking forward to the feed back.

Sorry P1et, don't know much about Menzerna...can't help you there my friend.
 
I feel the same way you do Nica. It's expensive stuff, but I would be more than willing to invest in something like that if it's for my personal vehicles...
 
PO85RD is discontinued in this country..PO106FF is available....Would be nice if AG could carry them ..but seems like the distributorship is limited...the Intensive polish sold here is different than the European version...the stuff here is PO91L I believe..and the stuff in Europe is PO85RD3-3.02...that version is the cermanic clear version...or the so called PRO version...

This stuff is far from cheap...50.00 a quart...for the PO85RD and PO106FF...and one has to be bought from Europe so shipping is not cheap either...

I know Scott said AG is trying to get the line..but also said it will be a hard product to catch...

I say in time Max will be able to carry the line..just have to wait and see...

Al
 
I have already found quite a few companies who have PO85RD in stock. Yes, it's expensive at $50 for 32 oz. but in my book it's worth it if it's the cream of the crop. I think that if it's good enough for high-end Italian sports cars, it must be good enough for my Dodge!

Don't get me wrong, I love Poorboys, but I will use that on the "other" cars I'm detailing. I feel that my baby deserves that little extra!!!
 
Menzerna is not currently looking for additional US distributors. When and if AG carries it, well the forum will likely be the first group in the know.

Optimum and XMT make nice substitutes !
 
P1et said:
I've been reading some great stuff about Menzerna polishes.

1) Are there plans for AG to add this product to their line-up as a high-end polish?

2) I am looking for a very fine finishing polish and am looking at PO85RD or 106FF. If they are 1.5 / 5 and 2.5 / 5 respectively on the abrasiveness scale, where can I put SSR1?

Haven't tryed the PO85RD but can say they the FINAL POLISH 11 is awesome.......with the EDGE 2K WAVE WHITE PAD... also the FINISHING TOUCH GLAZE is very easy to use topped with WGDG or souveran paste or liquid or both......:cheers:
 
killrwheels@autogeek said:
Optimum and XMT make nice substitutes !
I am looking forward to these. I will get my OP tomorrow, and will see how it works. I have use all the menzerna line. There soap sucks(IMO) I have used the PG, 106, IP, and FPII, FMJ which all work very well.
Now I REALLY like the Detailer'sPride Super Swirl Elimintor( which has been discountinued):mad::mad::mad:. I could use any type pad and get great results. It worked that well.
 
HighEndDetail said:
I am looking forward to these. I will get my OP tomorrow, and will see how it works. I have use all the menzerna line. There soap sucks(IMO) I have used the PG, 106, IP, and FPII, FMJ which all work very well.
Now I REALLY like the Detailer'sPride Super Swirl Elimintor( which has been discountinued):mad::mad::mad:. I could use any type pad and get great results. It worked that well.


i know.......they also discontiued the final finish polish

why?????? they decided :(
 
Last edited:
all of the line, outside of the polishes, for Menzerna is rebottled and likely repackaged products from another US vendor (see bottles for hint). Dont think because it has the name, its all the same.

Highend, might wanna try the updated Pinnacle twins. Good stuff, just might make you forget the DP cousins.
 
:iagree:
Nica said:
With all the commotion this Menzerna has caused I'm really interested on the feed back you are going to get with the first question. Sounds like a good product, I'd be willing to spend the extra cash for this product if AG choose to stock it.

Looking forward to the feed back.

Sorry P1et, don't know much about Menzerna...can't help you there my friend.

:iagree:
 
killrwheels@autogeek said:
Menzerna is not currently looking for additional US distributors. When and if AG carries it, well the forum will likely be the first group in the know.

Optimum and XMT make nice substitutes !

I've used most of the Menzerna products and the new Pinnacle Twins walks all over them. I mean it. The Twins have tons of work time, no dusting, and finishes down so smooth. Most of you saw me use ASR to remove scratches with the PC on Lexxus' Camry.

I doubt AG will carry Menzerna anytime soon.

Get the Twins or XMT. They cost a lot less and you will support the company that gave us this forum!
 
HighEndDetail said:
.
Now I REALLY like the Detailer'sPride Super Swirl Elimintor( which has been discountinued):mad::mad::mad:. I could use any type pad and get great results. It worked that well.

ED, you know I too like SSR. It's the best polish for the money......or any money in my opinion. Now, it's gone. I now use the Twins like I've posted. I still have 5, 16oz. bottles of SSR though. It will get used too!
 
Menzerna P0106FF

I hate to disagree with the pros but, It is my understanding that the Menzerna P0106FF is one of the only polishes formulated for the superhard Ceramiclear finishes that Mercedes now uses. The finishes are extremly hard to polish (especially for us amateurs).

I said before I ordered the Menzerna, I hate to order from sites other than AG but, if what I was told is true, maybe we need to be a little less Rah RAh and admit there is a very good product that AG doesnt carry.:rolleyes:

see prior threads from january titled Mercedes "ceramiclear" clear coat
 
Last edited:
killrwheels@autogeek said:
Highend, might wanna try the updated Pinnacle twins. Good stuff, just might make you forget the DP cousins.

I know I will. I just have to get rid of the other polishes I have, most are 3/4 full
 
Ok Ok...I will get in on this one as well.

PB SSR dusts too much for me, thus why I have the DP Super and Mild SR, and I like them alot. I also use the 85RD which is a final polish, with slightly less cut than the 106FF, both suitable to ceramic clears. There is 85U I think that is for normal clears, but I have not used it nor want to use it as the 85RD works fine on normal clears as well. There is also the 85RD3.0 which is not dissimilar to the Intensive Polish, in fact alot of the time its relabelled 85RD3.0 or alternative for normal coats the 091L. I am yet to use the Power Gloss with a cutting rating of 5...or the FMJ though its similar to WG Deep Gloss.

Further Finial Polish II is effectively 87MF which I think is discontiued, well here anyway.

From all accounts the Pinnacle twins are similar, to me it comes down to a cost/benefit and I get the 1litre/32oz (I think that conversion is right) Menzerna's polishes and I like them. As for getting the Pin Twins, well maybe one day....but for now Menzerna is better than the DP and SSR stuff I have on the shelf

As a comparison, 85RD is very similar to Swissol Cleaner Fluid.
 
justin30513 said:
ED, you know I too like SSR. It's the best polish for the money......or any money in my opinion. Now, it's gone. I now use the Twins like I've posted. I still have 5, 16oz. bottles of SSR though. It will get used too!

I'm sure I will be getting them soon enough. The twins that is.
And I just might steal a bottle from you, when you come back down:D:D
 
jfsully said:
I hate to disagree with the pros but, It is my understanding that the Menzerna P0106FF is one of the only polishes formulated for the superhard Ceramiclear finishes that Mercedes now uses. The finishes are extremly hard to polish (especially for us amateurs).

I said before I ordered the Menzerna, I hate to order from sites other than AG but, if what I was told is true, maybe we need to be a little less Rah RAh and admit there is a very good product that AG doesnt carry.:rolleyes:

see prior threads from january titled Mercedes "ceramiclear" clear coat

You can have the most uber compound in the world, and if you dont have a rotary to heat the compound, break it down and do real correction, then it is useless. For christs sake, AG cannot carry every line, and with a PC, the Pinnacle Twins DO WORK BETTER. Ive tried em, Justin even gave his input. Theres no need for you to make your little statement about Menzerna, we all know its a good product.

See signature.
 
Umm I use the PC, well actually its a Bosch as we can't get the PC down here, and the Optimum (though inconsitently) and the Menzerna work fine for me and brak down. The OC takes forever, and I would like to try the twins...

Everyone has an opinion and everone is allowed to express it ryan take a large chill pill and call us in the morning...
 
Back
Top