any Tips for working with black Honda paint

[Detailchick]

I have a detail lined up for next week It's a 2002 Civic Coupe NIGHTHAWK BLACK PEARL The car is in pretty bad shape It's keyed on one side and has some deep scratches. what can you suggest for this car any tips products that work good. I know I'll be going M105/205 collinite for my wax thats what Im sure of so far.

[Frenchie]

I own a 2003 Civic of the same color. IMO product wise you look good. Are you using a DA or rotary? My best advice is to take whatever you think is going to be the proper technique and tone it down one step. It is one of my least favorite paint's to work with but is very pretty once it is finished. Look at my facebook page for a photo album of one I just did.

[HellDemon]

Yup. With super soft paint like honda's, you gotta check for any micro-marring that any aggressive compound will do. Even a mediocre finishing polish would leave some scratches, so always start with the least aggressive method and see where that takes you.

[Detailchick]

I own a 2003 Civic of the same color. IMO product wise you look good. Are you using a DA or rotary? My best advice is to take whatever you think is going to be the proper technique and tone it down one step. It is one of my least favorite paint's to work with but is very pretty once it is finished. Look at my facebook page for a photo album of one I just did.
I'm using a rotary (soft paints make me wish I had a DA) and nice pictures btw


Yup. With super soft paint like honda's, you gotta check for any micro-marring that any aggressive compound will do. Even a mediocre finishing polish would leave some scratches, so always start with the least aggressive method and see where that takes you.
The more I read about this paint the more I worry lol I'm thinking I will do a panel with just 205 and see how that goes, possibly use 105 just for spot corrections

[Frenchie]

FWIW I use a rotary too, not a DA. In some of the pictures you can see me getting at it with the rotary. Anyways, I have only had to use 105 for serious spots on the car, One of which you can see in that picture album, and even then the scratches were beyond repair without touching it up.

[Detailchick]

I have a some of megs #83 cleaner/polish should I use this after 205? I have never used it

[Mike Phillips]

I have a some of megs #83 cleaner/polish should I use this after 205? I have never used it

The M83 is a DAT product, the M205 is a SMAT product, the M205 will leave a nicer looking finish via rotary buffer.

If you want to finish out swirl free using only a rotary buffer on your Honda's paint, get some SF 4500 – Super Finish Polish (http://www.autogeek.net/menzerna-final-finish-po85rd.html) (PO85RD) and you're going to need some very soft foam finishing pads, more pads is better because key to finishing out swirl free with only a rotary buffer is working clean. So you can either meticulously clean your pads as you're working around your Honda, (nylon brush and terry cloth towel), or switch to a clean, soft dry pad.

See new names here,

NEW - Menzerna - New Names and Product Numbers (http://www.autogeekonline.net/forum/products-guides/47067-menzerna-new-names-product-numbers.html)


Some people continue to call it PO85RD but the name is now SF 4500



:xyxthumbs:

[Mike Phillips]

I had that same color on my 2004 Pilot...


http://archive.meguiarsonline.com/gallery/data/500/2Pilot_New.jpg




:)

[alko]

DC...the last detail I did on my Acura's soft black paint, I used the Wolfgang Twins. They worked really well on the car. Before I used the Sonus SFX line 2-4, which I was quite pleased with the results. I think you're good with M105/205. I topped my car with Collinite 915 and it looked fantastic. I did notice a HUGE difference when I polished and then put a sealant on. This last time when I used the twins, I just went straight to topping it with 915. Looks ALOT better with sealant and then topped with a nice nuba.

Do you plan on getting the deeper scratches out? Make sure you have some good quality MF towels because it is so easy to swirl the paint back up.

[Shane731]

Sending you a PM so as to comply with forum rules.

[glen e]

just did a 2001 civic with white lc ccs pad on a gg6 and d151

came out great

followed with UPGP....