Wax questions

J

Jmoran

New member
Joined
May 27, 2012
Messages
94
Reaction score
0
How long should I let my wax sit for before I remove it(I'm doing it by hand)
 
I know I need to let it dry to a haze but what will happen if I leave it dry longer or shorter?
 
Following the manufactures directions is usually a good starting point.

There are so many different waxes out there to really give you a direct time line.

Heat and humidity play a big role on that time also....read the directions do a small test spot if need be.
 
Jmoran said:
How long should I let my wax sit for before I remove it(I'm doing it by hand)
Click to expand...

Most products approximate haze times are mentioned in their directions so look there first. Also, many waxes are wipe on wipe off, no drying or hazing...

Always apply waxes very thin otherwise they'll become difficult to remove and you're just wasting expensive product.... Under normal conditions with temps mid 60's and above, 30 minutes should be enough however swipe your finger across the panel and see if it feels dry and wipes off cleanly....
 
dad07 said:
Following the manufactures directions is usually a good starting point.

There are so many different waxes out there to really give you a direct time line.

Heat and humidity play a big role on that time also....read the directions do a small test spot if need be.
Click to expand...

:iagree:

You can always use the swipe test to see if the wax is removed without smearing or streaking. Then that is the appropriate time to remove.
 
Which wax ??? Pinnacle waxes are buffed off while slightly damp. Seems to work with alot of pure nuba pastes.
 
You must log in or register to reply here.
Back
Top