Wanting to try a different paint sealant

D

durant113

New member
Joined
Sep 8, 2010
Messages
29
Reaction score
0
I was wondering what paint sealants have worked well for some of you. I have used PB EX-P and don't mind it. I also have used Rejex and probably like that a bit more than PB, if I have time to let it cure. I am open to suggestions. It is for a Tri-Coat Pearl White F-150 that is a daily driver.
 
Optimum opti seal, ultima paint guard plus, blackfires crystal seal, all super easy!
 
Duragloss #105 Total Performance Polish or Duragloss #111 Clear Coat Polish :)
 
habeba86 said:
4 star UPP

Four Star Ultimate Paint Protection, Four Star UPP, paint sealant

Im in love with this stuff!
Click to expand...

+1!!!

I've just used it a few weeks ago... Made the metallic flakes really pop and gave the car a great wet look. Plus it seems to be protecting the paint really well.

I also love Wolfgang Deep Gloss and Ultima Paint Guard Plus. All great choices, when the latter will be the one that is the most easy to use, plus you can layer it with another coat just 45 minutes later.
 
Auto finesse tough seal and power seal, extreme durability and looks.
Blackfire crystal seal and Meguiar's ultimate paste.
 
These are the sealants I've tested and used and they are outstanding. With the exception of the clear sealants, all are applied using my Porter Cable 7424 dual action polisher and a blue or red foam pad...:props:


Sealants



These are what I call clear one step products. These are applied and left to dry without hazing.


 
Thanks for the input. I think that I am going to try the Opti-Seal and Menzerna Power Lock to start with. I assume it wouldn't hurt to layer any of these after an application of XMT's 360? I only have some slight swirls that I can make out on that white paint.
 
durant113 said:
Thanks for the input. I think that I am going to try the Opti-Seal and Menzerna Power Lock to start with. I assume it wouldn't hurt to layer any of these after an application of XMT's 360? I only have some slight swirls that I can make out on that white paint.
Click to expand...

I'm assuming your referring to XMT 360 polish then yes.

All sealants can be layered but some require more curing time than others so just follow the manufactures instructions.
 
BobbyG said:
These are the sealants I've tested and used and they are outstanding. With the exception of the clear sealants, all are applied using my Porter Cable 7424 dual action polisher and a blue or red foam pad...:props:


Sealants



These are what I call clear one step products. These are applied and left to dry without hazing.


Click to expand...

im surprised to not see wolfgang in your list bobbyg:wow:
 
You must log in or register to reply here.
Back
Top