View Full Version : One pad OK for glazes and waxes?
Dogfather
08-27-2013, 03:30 PM
I understand the reasons for 3 or 4 pads when compounding or polishing, but do I need more than one pad when applying non-abrasive products? I'm in the midst of putting together a shopping list.
Thanks.
Evan.J
08-27-2013, 03:34 PM
I have a dedicated pads for my sealants waxes and glazes (one for each)
DaHen
08-27-2013, 07:40 PM
I have a dedicated pads for my sealants waxes and glazes (one for each)
Same here. Try to keep them separate.
Dogfather
08-27-2013, 08:19 PM
Yes. Dedicated pads for each product. I was asking can I for instance, apply something like EZ Creme to the entire car with one gray pad.
Setec Astronomy
08-27-2013, 08:26 PM
You should be fine with that, as long as you don't get it too dirty bumping trim, etc.
Dogfather
08-27-2013, 08:43 PM
You should be fine with that, as long as you don't get it too dirty bumping trim, etc.
Sounds good.
Thanks.
Harry Da Hamster
08-27-2013, 11:35 PM
I have several applicator pads that i share with all non abrasive products
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.