View Full Version : CG Fabric clean or Lightning Fast
I had Fabric clean in my cart ready to order until I read about Lightning fast. They both have a ratio of 1:20 which very economical in the long run. From what I gathered FC foams more and has odor eliminators while LF suppose to foam less. So which one to get?
david11g35
10-31-2013, 02:53 AM
I have both. Personally I like lighting fast better. Fabric clean does foam a lot. Unless you have a hot extractor I would go with LF. Both clean about the same
Sent from my SGH-T999 using Tapatalk 2
GenesisCoupe
10-31-2013, 07:38 AM
I use Fabric clean and i'm very satisfied with it. The remaining foam i usually suck up using a wet vac with no problems.
KillaCam
10-31-2013, 07:45 AM
Is everyone using this at 20:1? Or stronger?
I am using FC at 20:1, and it seems to be working really good for me.
Scott@IncrediblyDetailed
10-31-2013, 09:30 AM
Not saying other fabric cleaners won't get these types of stains out but Lightning Fast seems to tackle just about anything.
http://www.incrediblydetailed.com/wp-content/uploads/2013/03/Gallery-Buick-Terraza-Before-Right-Box.jpg
http://www.incrediblydetailed.com/wp-content/uploads/2013/03/Gallery-Buick-Terraza-After-Right-Box.jpg
http://www.incrediblydetailed.com/wp-content/uploads/2013/03/Gallery-Buick-Terraza-Before-Rear.jpg
http://www.incrediblydetailed.com/wp-content/uploads/2013/03/Gallery-Buick-Terraza-After-Rear.jpg
Looks good Scott, what extractor are you using?
Here is an example of CG FC (20:1) that I did recently.
https://lh4.googleusercontent.com/-oZLu08yEiPk/UltYNANtW1I/AAAAAAAAAIk/OGNfMblghuw/w626-h835-no/P1017099.JPG
Hmmm decisions decisions, seems like everyone recommend both.
Either one will work just fine. Compare prices and base you decision on that. CG FC is pretty cheap and you will get a lot of use out of a small bottle with mixing it at 20:1.
B53x11
10-31-2013, 03:41 PM
i have LF and use it 20:1. it has worked great for me.
zmcgovern45
10-31-2013, 03:43 PM
I use Fabric Clean (20:1) and have had good luck.
General Consensus - You'll be good with either product!
RhetoricMixes
10-31-2013, 04:40 PM
I actually found 20:1 to not be effective so I mix mine at 7:1 with good results every time. Albeit it does foam a lot when I use it at that dilution so I very very lightly spray and it gets stains out no problem.
Scott@IncrediblyDetailed
10-31-2013, 04:50 PM
Looks good Scott, what extractor are you using?
Here is an example of CG FC (20:1) that I did recently.
[IMG]https://lh4.googleusercontent.com/-oZLu08yEiPk/UltYNANtW1I/AAAAAAAAAIk/OGNfMblghuw/w626-h835-no/P1017099.JPG[IMG]
Steam, no extractor. Sometimes I bust out the small Bissell.
KillaCam
10-31-2013, 07:17 PM
Steam, no extractor. Sometimes I bust out the small Bissell.
What's the process you use for steam? Spray, agitate, then steam and wipe away the excess with a towel?
I always extract with the bissell when doing carpets.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.