PDA

View Full Version : Menzerna Intensive Polish PO 91 E



Pages : [1] 2

Irishwoodchuck
11-07-2013, 08:54 PM
So I just ordered Menzerna Intensive Polish PO 91 E into kit and want to make sure I have the process right. I will be working by hand not machine. I clayed the car about 2 weeks ago so it should be pretty clean.

Process:
Wash/Dry Shampoo(poorboys)
Polish Menzerna Intensive Polish PO 91 E

32 oz. Menzerna Final Polish PO 85U
Seal (DP Poli Seal)Detailer's Pro Series DP Poli-Coat Paint Sealant, polymer paint sealant, auto paint sealant, DP Policoat paint sealant, paint sealer (http://www.autogeek.net/dp-poli-coat-32oz.html)
Meguires 26 cabana wax 2 coats

Any suggestions would be welcomeFeed back please
Ben

cleanmycorolla
11-07-2013, 09:04 PM
If you're polishing by hand good luck!

Rsurfer
11-07-2013, 09:07 PM
So I just ordered Menzerna Intensive Polish PO 91 E into kit and want to make sure I have the process right. I will be working by hand not machine. I clayed the car about 2 weeks ago so it should be pretty clean.

Process:
Wash/Dry Shampoo(poorboys)
Polish Menzerna Intensive Polish PO 91 E

32 oz. Menzerna Final Polish PO 85U
Seal (DP Poli Seal)Detailer's Pro Series DP Poli-Coat Paint Sealant, polymer paint sealant, auto paint sealant, DP Policoat paint sealant, paint sealer (http://www.autogeek.net/dp-poli-coat-32oz.html)
Meguires 26 cabana wax 2 coats

Any suggestions would be welcomeFeed back please
Ben

Are you buying these polishes from AG? They are pretty old numbers.

Vegas Transplant
11-07-2013, 09:10 PM
That's a heck of a lot of product. Are you production?
Menzerna Intensive Polish PO 91E, Menzerna polishes, PO91E (http://www.autogeek.net/128ozmeinpo.html)

edit: nevermind I see the qt.

Irishwoodchuck
11-07-2013, 09:26 PM
No I am not production just caught the sale on autogeek

Irishwoodchuck
11-07-2013, 09:31 PM
I do own a Black and Decker 6" waxer/ polisher but I havent used it on this car i would need to replace the bonnet if I went that way. I know a lot of guys machine polish but I just dont have the money.

Irishwoodchuck
11-07-2013, 09:44 PM
Hopefully it will look real sharp when I'm done.

Rsurfer
11-07-2013, 09:47 PM
I do own a Black and Decker 6" waxer/ polisher but I havent used it on this car i would need to replace the bonnet if I went that way. I know a lot of guys machine polish but I just dont have the money.

That B & D is only good for waxing.

Rsurfer
11-07-2013, 09:48 PM
Hopefully it will look real sharp when I'm done.

Post some pictures when your done, good luck.:xyxthumbs:

Irishwoodchuck
11-07-2013, 09:52 PM
Yeah that s why i strayed away from it and its getting older too

custmsprty
11-07-2013, 09:54 PM
Yeah that s why i strayed away from it and its getting older too

It's still better than doing it by hand, Wally World has 6" pads for that last itme I looked.

Rsurfer
11-08-2013, 01:51 PM
It's still better than doing it by hand, Wally World has 6" pads for that last itme I looked.

Are those pads or bonnets? The B & D polisher uses bonnets and imo doesn't have enough power to break down any compound/polishes.

Irishwoodchuck
11-08-2013, 10:46 PM
Is it better to do the poli seal after the polish?
Skip the opti seal and do two coats of wax?
Do the poli seal them do the polishing?

I've been reading about stickiness?

Rsurfer
11-08-2013, 10:52 PM
Is it better to do the poli seal after the polish?
Skip the opti seal and do two coats of wax?
Do the poli seal them do the polishing?

I've been reading about stickiness?

Poli Seal if I remember correctly is an all in one. It has very light correction ability.

custmsprty
11-08-2013, 11:51 PM
Are those pads or bonnets? The B & D polisher uses bonnets and imo doesn't have enough power to break down any compound/polishes.

Foam and microfiber