FrankS
04-15-2014, 09:35 PM
This PT Cruiser belongs to my niece's husband. My niece and her husband always invite us over her house for Thanksgiving and she does most of the cooking. I told her that I would like to detail the PT Cruiser as a favor. Her husband went out of town this past weekend and so this was a good time for me to have the car for a couple of days.
Before shots
Clear coat failure on the front bumper and healights need restoration.
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1165.JPG
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1166.JPG
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1170.JPG
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1171.JPG
Clear coat failure on the rear bumber too.
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1172.JPG
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1175.JPG
Headlight Restoration
Before shots.
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1181.JPG
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1182.JPG
Prep work.
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1190.JPG
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1189.JPG
Cleaning the lenses.
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1191.JPG
Method of choice - Dewalt drill with LC 3-1/4" thin foamed wool pad & DP All-In-One Headlight Restoring Polish.
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1192.JPG
This is my neighbor Eddie - he wanted to help.
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1195.JPG
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1194.JPG
Wiping off the polish.
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1196.JPG
Final result, looking good - I was going to experiment and do a multi-step process with sanding on the driver's lens but since the passenger side looked so good after the DP All-In-One I just used the same process.
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1198.JPG
Here's Eddie working on the driver's side - he's getting the hang of it.
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1197.JPG
Final result - you may not be able to tell by the picture but it looks like new.
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1200.JPG
BL Surface Coating on the Lenses - this was actually one of the last things I did but I wanted to show it here as part of the headlight restoration.
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1232.JPG
Now for the wheels
Some before shots of the wheels and wells.
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1183.JPG
Owner had been driving on some dirt roads.
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1184.JPG
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1186.JPG
Used Megs APC+ (4 to 1) and a Mothers wheel well brush for the wheel wells.
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1201.JPG
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1202.JPG
Used Tuf Shine Tire Cleaner on the tires - I suppose I could have just used the APC+ but I really like the TS Cleaner.
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1206.JPG
Tires were dirty - repeated the process 2 or 3 times until the tires were cleaned.
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1203.JPG
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1205.JPG
Used WG Uber Wheel Cleaner and a Mothers wheel brush on the wheels (actually plastic hubcaps).
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1207.JPG
Gotta get around those lug nuts.
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1208.JPG
Tires cleaned and dressed with DP Tire Gel - I actually applied the dressing after polishing but wanted to show it hear.
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1235.JPG
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1231.JPG
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1230.JPG
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1229.JPG
Washing the car
Time to give her a good bath - foamed the car with CG Citrus Wash Red using foam cannon attached to pressure washer.
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1210.JPG
Let the foam dwell for a few minutes, rinsed with PW, foamed again and then washed using 2 bucket method with Montana boars hair brush attached to a Shur-Line extendable pole.
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1209.JPG
Decontamination
I knew decontamination was needed but did the baggie test anyway - felt like sandpaper!
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1218.JPG
Some type of mold or sap on the roof.
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1211.JPG
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1213.JPG
Tried a couple of things to get it off such as Stoners Tarminator and even mineral spirits but it didn't do anything. I thought I would have to use a plastic razor blade but I didn't have any so I went with a clay bar and ONR as the lube. I never thought the clay bar would do anything since the mold/sap was pretty hard. To my amazement the clay bar leveled it out really good.
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1214.JPG
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1217.JPG
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1216.JPG
The clay bar worked good but I went through a couple of clay bars just on the roof alone and ran out of clay so I used the Nanoskin medium grade pad on a PC to do the rest of the car.
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1220.JPG
Time to polish
My goal was to do a one step, all-in-one polish, since I knew this was a daily driver and probably wouldn't be washed every week. I just wanted some minor correction done, the paint cleaned up and some protection, all in one step. So I went with Optimum Poli-Seal since I've heard good reports about it and received a couple of bottles for Christmas as a gift. Since I already had my PC out, I decided to use it along with a 5.5" HT tangerine pad.
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1222.JPG
Beauty shots
Really liked the Poli-Seal...easy to work with and better results than I expected. Hopefully the protection will last a while.
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1224.JPG
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1225.JPG
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1226.JPG
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1228.JPG
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1227.JPG
Additional work (no pictures)
Also did the door jambs using the McCulloch Steamer
Did a light engine detail
Vacuumed and wiped down interior
Cleaned the glass with Stoners Invisible Glass and WW MF glass towels
Special thanks
Special thanks to Chris aka Chris@autocleanse and Robert DiTerrlizzi aka Impressions for their advice, particularly with what to use on the roof. Great guys and always willing to help out.
Special thanks to Mike Phillips for his articles on how to post on the forum. I have a new appreciation for the work he does on the forum. It takes a lot of time to create some good posts, editing and uploading pictures, etc.
:dblthumb2:
Before shots
Clear coat failure on the front bumper and healights need restoration.
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1165.JPG
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1166.JPG
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1170.JPG
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1171.JPG
Clear coat failure on the rear bumber too.
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1172.JPG
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1175.JPG
Headlight Restoration
Before shots.
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1181.JPG
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1182.JPG
Prep work.
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1190.JPG
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1189.JPG
Cleaning the lenses.
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1191.JPG
Method of choice - Dewalt drill with LC 3-1/4" thin foamed wool pad & DP All-In-One Headlight Restoring Polish.
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1192.JPG
This is my neighbor Eddie - he wanted to help.
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1195.JPG
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1194.JPG
Wiping off the polish.
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1196.JPG
Final result, looking good - I was going to experiment and do a multi-step process with sanding on the driver's lens but since the passenger side looked so good after the DP All-In-One I just used the same process.
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1198.JPG
Here's Eddie working on the driver's side - he's getting the hang of it.
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1197.JPG
Final result - you may not be able to tell by the picture but it looks like new.
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1200.JPG
BL Surface Coating on the Lenses - this was actually one of the last things I did but I wanted to show it here as part of the headlight restoration.
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1232.JPG
Now for the wheels
Some before shots of the wheels and wells.
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1183.JPG
Owner had been driving on some dirt roads.
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1184.JPG
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1186.JPG
Used Megs APC+ (4 to 1) and a Mothers wheel well brush for the wheel wells.
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1201.JPG
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1202.JPG
Used Tuf Shine Tire Cleaner on the tires - I suppose I could have just used the APC+ but I really like the TS Cleaner.
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1206.JPG
Tires were dirty - repeated the process 2 or 3 times until the tires were cleaned.
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1203.JPG
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1205.JPG
Used WG Uber Wheel Cleaner and a Mothers wheel brush on the wheels (actually plastic hubcaps).
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1207.JPG
Gotta get around those lug nuts.
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1208.JPG
Tires cleaned and dressed with DP Tire Gel - I actually applied the dressing after polishing but wanted to show it hear.
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1235.JPG
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1231.JPG
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1230.JPG
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1229.JPG
Washing the car
Time to give her a good bath - foamed the car with CG Citrus Wash Red using foam cannon attached to pressure washer.
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1210.JPG
Let the foam dwell for a few minutes, rinsed with PW, foamed again and then washed using 2 bucket method with Montana boars hair brush attached to a Shur-Line extendable pole.
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1209.JPG
Decontamination
I knew decontamination was needed but did the baggie test anyway - felt like sandpaper!
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1218.JPG
Some type of mold or sap on the roof.
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1211.JPG
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1213.JPG
Tried a couple of things to get it off such as Stoners Tarminator and even mineral spirits but it didn't do anything. I thought I would have to use a plastic razor blade but I didn't have any so I went with a clay bar and ONR as the lube. I never thought the clay bar would do anything since the mold/sap was pretty hard. To my amazement the clay bar leveled it out really good.
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1214.JPG
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1217.JPG
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1216.JPG
The clay bar worked good but I went through a couple of clay bars just on the roof alone and ran out of clay so I used the Nanoskin medium grade pad on a PC to do the rest of the car.
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1220.JPG
Time to polish
My goal was to do a one step, all-in-one polish, since I knew this was a daily driver and probably wouldn't be washed every week. I just wanted some minor correction done, the paint cleaned up and some protection, all in one step. So I went with Optimum Poli-Seal since I've heard good reports about it and received a couple of bottles for Christmas as a gift. Since I already had my PC out, I decided to use it along with a 5.5" HT tangerine pad.
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1222.JPG
Beauty shots
Really liked the Poli-Seal...easy to work with and better results than I expected. Hopefully the protection will last a while.
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1224.JPG
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1225.JPG
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1226.JPG
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1228.JPG
http://www.autogeekonline.net/gallery/data/2369/800_IMG_1227.JPG
Additional work (no pictures)
Also did the door jambs using the McCulloch Steamer
Did a light engine detail
Vacuumed and wiped down interior
Cleaned the glass with Stoners Invisible Glass and WW MF glass towels
Special thanks
Special thanks to Chris aka Chris@autocleanse and Robert DiTerrlizzi aka Impressions for their advice, particularly with what to use on the roof. Great guys and always willing to help out.
Special thanks to Mike Phillips for his articles on how to post on the forum. I have a new appreciation for the work he does on the forum. It takes a lot of time to create some good posts, editing and uploading pictures, etc.
:dblthumb2: