This is on a silver'ish '99 accord. Light-medium swirls, nuthing to bad. Paint is in fairly good condition actually as far as having held its gloss. Anyway, ill be using this UDM for the first time....
-Wash with DP ultra foam + using the correct ratio of Megs body solvent, ill use a spray bottle and spray it on each panel before i foam it, then wash/ rinse as usual.
-Clay with DP clay and DP clay lube.
-Rewash again, again with the body solvent to make sure i get everything off (Theres allotta crap like tar and stuff on this car)
-Dry
Now onto the polishing
-XMT 360 with a CCS white pad with the UDM. (on speed 5 or 6?)
-Klasse sealent glaze with the ultra soft red pad
-Possibly some souveran if i feel like it, not worried about the ultimate glass on this ride to much, going mainly for protection.
Questions.... Should I use klasse AIO before the klasse sealent glaze? Can AIO be applied by hand with just as good results? Any other comments or opinions? Tips?
Also, Im not using a stopwatch, ill be doing about a 2x2 foot area and i think im gonna stop when i see the polish has totally broken down. I may use my cell phone though and keep an eye on how much time passes, how long should it take 360 to break down?
With 360 correcting swirls should i still go slow like in the video of the #3, then about 2/3rd's of the way through start moving faster?
Klasse is fine to use over 360 right?
Thanks, and again all suggestion and tips are welcome and appreciated
-Wash with DP ultra foam + using the correct ratio of Megs body solvent, ill use a spray bottle and spray it on each panel before i foam it, then wash/ rinse as usual.
-Clay with DP clay and DP clay lube.
-Rewash again, again with the body solvent to make sure i get everything off (Theres allotta crap like tar and stuff on this car)
-Dry
Now onto the polishing
-XMT 360 with a CCS white pad with the UDM. (on speed 5 or 6?)
-Klasse sealent glaze with the ultra soft red pad
-Possibly some souveran if i feel like it, not worried about the ultimate glass on this ride to much, going mainly for protection.
Questions.... Should I use klasse AIO before the klasse sealent glaze? Can AIO be applied by hand with just as good results? Any other comments or opinions? Tips?
Also, Im not using a stopwatch, ill be doing about a 2x2 foot area and i think im gonna stop when i see the polish has totally broken down. I may use my cell phone though and keep an eye on how much time passes, how long should it take 360 to break down?
With 360 correcting swirls should i still go slow like in the video of the #3, then about 2/3rd's of the way through start moving faster?
Klasse is fine to use over 360 right?
Thanks, and again all suggestion and tips are welcome and appreciated