Rupes 15 / Blackfire Total Polish and Seal question?

U

UglyBetty

New member
Joined
Jul 7, 2013
Messages
269
Reaction score
0
Just curious, Rupes 15(maiden voyage), Rupes pads, BFTPnS. Can anyone offer recommendations for pad color and speed? Not much to correct, just a general cleanup.
 
"Test Spot...Least aggressive first".
1. RUPES White finishing.....w/BTPnS...@4-6; 3-0-Done
2. RUPES Yellow polishing....w/BTPnS...@4-6; 3-0-Done

Note:
Shouldn't need much, if any, downforce.


Bob
 
Yellow or white, blue is pretty harsh, green a step softer still pretty stout.

Sent from my LG-E970 using Tapatalk 2
 
FUNX725 said:
"Test Spot...Least aggressive first".
1. RUPES White finishing.....w/BTPnS...@4-6; 3-0-Done
2. RUPES Yellow polishing....w/BTPnS...@4-6; 3-0-Done

Note:
Shouldn't need much, if any, downforce.


Bob
Click to expand...

3-0-done?= 3 passes?

Thanks!
 
UglyBetty said:
3-0-done?= 3 passes?

Thanks!
Click to expand...
Sorry...

-When finished performing the "Test Spot" @ machine speed 4-6...
Then reduce the machine speed to 3-(2, 1, 0...Done with "Test Spot" #1).

-Inspect; confirm that this was the combo that meets your satisfaction, or not.

-If satisfied: Proceed with remainder of vehicle.
If not satisfied: Proceed with "Test Spot" #2.

Bob
 
You really do not need to use speed 6 with TP&S. It will probably dry out very quickly. Start at speed 4 and light pressure.
 
You must log in or register to reply here.
Back
Top