PDA

View Full Version : Tire cleaning woes...



Pages : [1] 2

mfrickman
06-10-2014, 05:38 PM
I was detailing a work truck today for a customer and was cleaning the tires and found that no matter how many times I cleaned the tire, I couldn't break down the residue (mud) that was on the tires. I literally invested too much time trying to clean these then realized that I had some old Bleche-wite in my shed.

I sprayed each tire twice after having scrubbed those same tires with D103 and was still getting brown off of the tire.

I finally got some progress out of it but was still not satisfied with the outcome. Is there anything like tufshine that will actually produce the results I'm looking for? I can't spend an hour plus just cleaning the tires. Any tips would also be greatly appreciated.

Thanks

Sent from my SCH-I545 using AG Online

Setec Astronomy
06-10-2014, 05:52 PM
You don't really mean you couldn't get mud off the tires, do you? You mean they were brown and no matter how many times you scrubbed them they still came up brown, right?

There are some caustic tire cleaners (usually containing sodium hydroxide) that will work a little better...it's possible the Tuf Shine cleaner falls into this category. But a really old tire or one that has had a lot of oily dressings on it might have to be cleaned 10 or 12 times IME.

mfrickman
06-10-2014, 06:37 PM
Not actual mud but I would call it staining from it. I've picked this client up from another local detailer so the tire dressing issue could be possible? I'm pretty sure the bleche-wite is caustic but unsure of how far up the pH scale it travels.

He seemed satisfied with what he had but you know how us detailers are..perfect in our eyes is 10x better than what the normal person thinks.

Sent from my SCH-I545 using AG Online

swanicyouth
06-10-2014, 06:40 PM
Why not just use TS Tire Cleaner?

If it's a cost issue, you can dilute the non concentrate version by 50% without loosing any real cleaning ability. So, a gallon is $20. Use it with a foaming sprayer and the TS tire brush and your golden.

808_detail_nut
06-10-2014, 07:10 PM
I been using purple power 1:1 with a garden sprayer and it's been working great. Let it foam up, scrub, then rinse. It comes out the Garden sprayer nice and foamy but the only downside is that you have to continuously pump the sprayer. It's cheap and also works great on the Wells and engines.

Sent from my SCH-I545 using AG Online

mfrickman
06-10-2014, 07:26 PM
I guess I can get some TS for the tough jobs but is it really that good? I enjoy the flexibility of the D103 because I use it on everything else exterior and it exceeds my expectations 95% of the time. Pretty solid considering it's cheap and dilutable.

Sent from my SCH-I545 using AG Online

Setec Astronomy
06-10-2014, 07:29 PM
You do know that D103 has been discontinued except in the 5 gallon size?

swanicyouth
06-10-2014, 07:32 PM
TS blows D103 away at cleaning tires, or anything else for that matter.

Eric M.
06-10-2014, 07:44 PM
Zep 505 will take care of it! Spray on, scrub with a stiff brush, rinse and repeat. Dirtiest tires have take 4 applications

mfrickman
06-10-2014, 09:21 PM
Yeah I know it's discontinued. I've got a gallon and a half left. Guess I'll be picking up some TS.

Sent from my SCH-I545 using AG Online

dc52nv
06-11-2014, 12:06 AM
OPC 1:1 works great for me.

KillaCam
06-11-2014, 08:04 AM
Zep 505 will take care of it! Spray on, scrub with a stiff brush, rinse and repeat. Dirtiest tires have take 4 applications


+1. It's the only stuff I use anymore.

Eric M.
06-11-2014, 09:00 AM
+1. It's the only stuff I use anymore.


And at 15$ for 128 oz.. it's a no brainer.

KillaCam
06-11-2014, 10:08 PM
And at 15$ for 128 oz.. it's a no brainer.


$15? I only pay $9. You're getting ripped!

The Guz
06-11-2014, 10:32 PM
Why not use D143 as it's a wheel and tire cleaner? Does a better job than D103.