Griots New G9 Polisher

d4dawg said:
I'm assuming the G9 will be used for future GG6 warranty replacements (when all existing GG6 inventory runs out)?
Click to expand...

Someone replied to their post on Social Media saying they'd try to sell the GG6 to buy this and Griot's replied saying not necessary, to call them and they have an upgrade offer for those with the GG6. So might be like $75 (give or take, I'm guessing) to upgrade via them if you already own the GG6.
 
I see some mentions of 1lb lighter on this thread but after watching their videos about the product, they mentioned 0.5lb lighter. So it might not be as noticeable as one would think. I think the added ergonomics make up for it though, even with same weight this better designed tool would be more comfortable to use.
 
MarkD51 said:
It sure is a nice looking tool Mike.
Click to expand...


I have a nice review for it too. By this I mean, I like it. TONS of power.


Buffing out 2 full size Detroit Iron cars really gave me a chance to get a true feel for the tool. I don't do mock-up. Mock up is where a person would buff a spot on a hood and then write a review. Both of the cars I machine polished are cool toys that started out in bad condition.


I'm on the IDA conference call right now, can only do so much multi-tasking.



:)
 
BSoares said:
Someone replied to their post on Social Media saying they'd try to sell the GG6 to buy this and Griot's replied saying not necessary, to call them and they have an upgrade offer for those with the GG6. So might be like $75 (give or take, I'm guessing) to upgrade via them if you already own the GG6.
Click to expand...

Dang it! I just finished convincing myself not to pull the trigger on the G9, reasoning I already have the GG6 and then you go ahead and post this about a possible upgrade offer which would make it hard not to upgrade. The G9 seems to have answered my prayers of a unit falling somewhere between the GG6 and the Boss. I will have to contact GG and inquire.
 
BSoares said:
I see some mentions of 1lb lighter on this thread but after watching their videos about the product, they mentioned 0.5lb lighter. So it might not be as noticeable as one would think. I think the added ergonomics make up for it though, even with same weight this better designed tool would be more comfortable to use.
Click to expand...

Thanks for clarifying. I must've misheard.

Mine's on order. Might ping them to see what the official upgrade fee is for my co-worker.
 
Just an observation that I've shared with my employers and industry leaders over the years,


When it comes to new products in the car detailing industry, people get the most excited about,

  1. New tools
  2. New compounds and polishes
  3. New waxes, sealants and ceramic coatings



All of these are PAINT RELATED.


I never really see anyone get excited about things like,

  • Carpet cleaner
  • Vinyl dressing
  • Tire dressing
  • etc.



It's all about the paint.


Even at my classes, everyone is excited to use all the different tools, the different buffing pads, compounds and polishes. No one really gets excited to clean interiors or any of the other important but somewhat mundane areas of car detailing.


Just an observation....



So to any company reading this into the future, take note.



:)
 
Even with the possibility of a rebate, looks like it's time to convert the GG6 into a 3" DA and pick up one of these, rather than opt for a trade in
 
briarpatch said:
Even with the possibility of a rebate, looks like it's time to convert the GG6 into a 3" DA and pick up one of these, rather than opt for a trade in
Click to expand...

Interesting observation - If you look at their updated page for their HD 3" backing plate (specially designed/weighted to go with the GG6), they don't recommend it for the G9. I would guess it's due to the weighting, but there's no mention anywhere for using 3" pads with it in their info I've seen.

Wouldn't be surprised if a new 3" machine is coming too.
 
I just spoke with GG and here is the skinny on the GG6 buy back which in fact GG is doing. They took my order over the phone for the G9 and found my previous order for the GG6 which they noted. They will be sending me a shipping label via email and once I send the GG6 back, they will charge my credit card $100.00 and ship the G9 to me saving me $50.00. Looking forward to receiving it and timely to as I have my truck, my wife's car and our 5th wheel to do.
 
Hermes1 said:
I just spoke with GG and here is the skinny on the GG6 buy back which in fact GG is doing. They took my order over the phone for the G9 and found my previous order for the GG6 which they noted. They will be sending me a shipping label via email and once I send the GG6 back, they will charge my credit card $100.00 and ship the G9 to me saving me $50.00. Looking forward to receiving it and timely to as I have my truck, my wife's car and our 5th wheel to do.
Click to expand...

Hmm, so they're only paying $49 for the GG6. I know that's probably good if you've had it for a long time but if it's fairly new I think one could get better money for it on a detailing group on FB or marketplace.
 
Hey. A much better deal than Ford gave to 2010 Mustang GT buyers when the 2011 base V6 had only 5 less horsepower... i think it's a great gesture.
 
I just ordered a G9, I had a G6 that I got from Amazon less than a month ago, unopened, so I can send it back. However I have a 5" backing plate for a G6 and hope that it will fit. I ? assume it uses the same threads as the G6, PC, etc. I also would like to use the 3 inch backing plate but there is nothing written about this.
I will have to download the G9 manual.
 
Sorry guys....

I processed the pictures for the El Camino I buffed out using this tool but typing out the words in a way that will have impact and endure takes time.


Will have it done tomorrow.

The short version is - this newest tool from Griot's is just like they say, it's powerful.

See what I say about it in my review tomorrow.

Griots_G9_El_Camino_000b.JPG



:)
 
Looking forward to the review. Thank you.
With a motor, as you would want in a car as well, you would like high torque at a low speed,
which should enable better polishing. From the specs it looks like this model has a nice motor and electronic controls.
 
I wonder if it has the same carbon brushes as the GG6?

ScottH
 
Hermes1 said:
I just spoke with GG and here is the skinny on the GG6 buy back which in fact GG is doing. They took my order over the phone for the G9 and found my previous order for the GG6 which they noted. They will be sending me a shipping label via email and once I send the GG6 back, they will charge my credit card $100.00 and ship the G9 to me saving me $50.00. Looking forward to receiving it and timely to as I have my truck, my wife's car and our 5th wheel to do.
Click to expand...
Yes I just called and they said the same thing, it's $100 out the door if you have the latest GG6 model and $135 if you have any older models.

Sent from my Pixel 2 XL using Tapatalk
 
charlestek said:
I just ordered a G9, I had a G6 that I got from Amazon less than a month ago, unopened, so I can send it back. However I have a 5" backing plate for a G6 and hope that it will fit. I ? assume it uses the same threads as the G6, PC, etc. I also would like to use the 3 inch backing plate but there is nothing written about this.
I will have to download the G9 manual.
Click to expand...

Per Griots it will not fit the G9. The only one that will fit is the ventilated 5” backing plate.
 
I guess if it’s $100 out the door it’s not bad. Because it seems to include shipping both ways and tax on that so it’s probably close enough to just avoid the hassle trying to sell your old one. Sort of screws Autogeek on that deal but hopefully the pads and etc will be purchased here :)
 
You must log in or register to reply here.
Back
Top