CQuartz/Opti-Coat 2.0 on Matte?

[aznwhip]

So most every post on CQuartz and Opti-Coat 2.0 have been dealing with normal car body paint. My question is how it effects the look on matte colors? I have a new set of wheels coming in that are matte and was thinking it would be a great opportunity to coat it while they were prestine. However, if I use CQuartz or Opti-Coat, I'll probably lose some of the matte effect by basically adding a layer of clear on it. My question is if anyone has tried applying either of these coats on matte color and just how glossy it makes it, or would you suggest not doing this to preserve the matte effect.

 

[FUNX650]

So most every post on CQuartz and Opti-Coat 2.0 have been dealing with normal car body paint. My question is how it effects the look on matte colors? I have a new set of wheels coming in that are matte and was thinking it would be a great opportunity to coat it while they were prestine. However, if I use CQuartz or Opti-Coat, I'll probably lose some of the matte effect by basically adding a layer of clear on it. My question is if anyone has tried applying either of these coats on matte color and just how glossy it makes it, or would you suggest not doing this to preserve the matte effect.

I am assuming the matte color on your new wheels are not clear-coated. If they are clear-coated an approach other than stated below would be in order.

Do you want the matte finish to remain "as matte as possible" for "as long as possible"? The reason for the matte appearance is basically it has microscopic surface imperfections that reflects light in a random manner/pattern. No products that contain waxes/polishes, including traditional car washes/shampoos should be used as they will 'fill-up' those imperfections and create a more and more glossier/shinier surface(s) as their usage continues.

IMO, If you would use one of the above coatings, the trade off of having more glossier wheels would be they would now be better protected and easier to maintain by far. But that choice would have to remain yours.

 

[C. Charles Hahn]

FUNX is correct, these coatings are intended for smooth "glossy" surfaces, and would likely change the appearance of the finish on your wheels.

However, it should be noted that there are a couple of manufacturers (Chemical Guys, Swissvax) who produce product lines specifically intended for the care and protection of matte finishes. These won't be "nano-coatings" like CQuartz and Opti-Coat 2.0 are, but they will allow you to protect your wheels without altering their appearance.

Since Autogeek does not sell either of the product lines I mentioned, I'm not going to post any links to them, but you can find them easily enough.

 

[FUNX650]

FUNX is correct, these coatings are intended for smooth "glossy" surfaces, and would likely change the appearance of the finish on your wheels.

However, it should be noted that there are a couple of manufacturers (Chemical Guys, Swissvax) who produce product lines specifically intended for the care and protection of matte finishes. These won't be "nano-coatings" like CQuartz and Opti-Coat 2.0 are, but they will allow you to protect your wheels without altering their appearance.

Since Autogeek does not sell either of the product lines I mentioned, I'm not going to post any links to them, but you can find them easily enough.

Thanks Charlie for the Swissvax Opaque and Chemical Guys MMD reminder. I believe Meguiar's, among others, has been working on similar matte finish products.

 

[conan777]

I just used Opti Coat 2.0 on My 06 Acura TL and GFG Chrome rims. I honestly bought it to see how it would protect my Wheels. Well after I was finished I applied it to my 09 Trek Mountain Bike which is Matte White in color. I laid the Opti Coat pretty thick actually hoping it would give the matte paint a nice Gloss sheen like it was clear coated but it did NOT! So I am pretty confident when I say that the Opti Coat 2.0 will not change the look of a Matte painted object. I can try to take a picture and post it for you later.

 

[Chris Thomas]

It will add some gloss, but you cannot be sure how much without doing a test spot. If you like the matte look, apply with caution.

 

[S2K]

What about 845? I am painting the barrels of my wheels with a satin black engine paint and was wondering how 845 would adhere to it. Not really concerned if it adds a little gloss because you can't really see it, just want to make them easier to clean.

 

[aznwhip]

Yeah, I've applied 845, Opti-seal, and poorboy's wheel sealant on matte black and matte gold wheels before and it gave it slight more of a sheen on it, but still maintained the matte appeal. That's why I was hoping that Opti-Coat or CQuartz could offer the same effect, but more durable.

conan777 - if you got pics, I'd love to see it on matte.

Chris is probably right that a test spot would probably be the best option. Just would be nice to know if people have already have had bad experience on matte to save me (and others in the future) the trouble.

 

[Chris Thomas]

Yeah, I've applied 845, Opti-seal, and poorboy's wheel sealant on matte black and matte gold wheels before and it gave it slight more of a sheen on it, but still maintained the matte appeal. That's why I was hoping that Opti-Coat or CQuartz could offer the same effect, but more durable.

conan777 - if you got pics, I'd love to see it on matte.

Chris is probably right that a test spot would probably be the best option. Just would be nice to know if people have already have had bad experience on matte to save me (and others in the future) the trouble.

I asked Dr. G about it for a customer's matte rims a while back and he said it will change the appearance, but the amount will vary by what you're coating. It will definitely not create a "high" gloss, but it will no longer be fully matte.