AOI Cleaner wax

stilltipping3

stilltipping3

New member
Joined
Jul 13, 2013
Messages
1,003
Reaction score
0
Hello every1, I need advice on your favorite all in one cleaner polisher wax. Im looking to cut down my detailing time with a product that takes less steps than my wash, clay, compound, polish and seal. Any suggestions? Feed back please
 
Meguiar's D151.. There's tons of threads on this try a search.
 
I prefer cleaner sealants like Poly-Seal due to durability. Does not have the cut like D151.

D151 is a med. cut, whereas PolySeal and 360 are light cut but the sealant last longer than cleaner waxes IMO.
 
Take a look at Meguiar's "Black Wax" and/or "White Wax." Don't let the name fool ya, they aren't meant to be used on just white or black surfaces.

Bill
 
Best one I have personally tried is Duragloss 501. I'm sure there are great ones out there, but this is my favorite so far.
 
Meguiar's has a bunch, besides the ones already listed.
Here's some more:
-A12; M06; M20; M50; M61; M66.

Some from a few other brands:

Mother's:
-California Gold Brazilian Carnauba Cleaner Wax
-Marine Cleaner/Wax
-FX Synwax
-Reflections Advanced Car Wax

3M:
-One Step Cleaner Wax

Klasse:
-Klasse AIO

Finish Kare:
-215 One Step Cleaner & Surface Sealant
-2180 Ultra Poly Wipe Sealant Conditioner

:)

Bob
 
I'm on the same situation. I'm going to try XMT 360 + XMT spray wax :confused:
 
DG 501 is a great cleaner/ sealant and I've recommended it to many of my friends. I use it on my own car. You haven't cleaned your paint until you've put on 501.

Your buffing pads will almost be black when your done and your paint will look like a mirror.

Not a bad sealant either. Several months of protection.
 
BigWorm said:
I'm on the same situation. I'm going to try XMT 360 + XMT spray wax :confused:
Click to expand...

If your going to try XMT360 make sure you pick up a couple green ccs pads. It will cut your polishing time in half compared to using a white polishing pad. If you need a little correction I've had good luck with the MF pads but it really reduces the working time and you'll use more product
 
I have had very good results with Griot's One Step Paint sealant.
 
Ipsdrew said:
If your going to try XMT360 make sure you pick up a couple green ccs pads. It will cut your polishing time in half compared to using a white polishing pad. If you need a little correction I've had good luck with the MF pads but it really reduces the working time and you'll use more product
Click to expand...

So the green CCS pads is better than white flat pads? I dont have the CCS pads yet and im still in the learning phase on detailing. I'll have the CCS pads on my nxt orders list:xyxthumbs:
 
The green pads were designed for all in ones. The have more cut but still finish out like a white polishing pad would

Sent from my HTCONE using AG Online
 
Ipsdrew said:
The green pads were designed for all in ones. The have more cut but still finish out like a white polishing pad would

Sent from my HTCONE using AG Online
Click to expand...

CCS
Green Polishing/Finishing Foam - Use this foam to apply one-step cleaner waxes. It is a balance of polishing and finishing that is perfect for all-in-one product application.

Flat Pad
White Polishing Flat 5.5 inch Foam Pad - Less dense foam formula for the application of cleaner waxes, one step polishes, or "all in one" type products. This pad has very light cutting power, so it's perfect for pre-wax cleaners

Looks like both is design for AIO cleaners?
 
You must log in or register to reply here.
Back
Top