Recent content by 2shiny

Thanks all. Might just invest in a FLEX first. Maybe then a 15mm later on.

Hi guys and girls, Currently getting back into detailing after 1.5year break starting up my own PT business. So now I'm looking to add a new polisher to the range. I have an 8mm dual action and a rotary for cutting work. Now I was looking around and found a 10mm throw,12mm throw 15mm throw and...

Given that subaru's tend to have softer paint, I would have expected a bit more cut tbh. Finishig results look good. Keep us updated on how the C2v3 holds up

It certainly has gloss enhancers. These will also give you beading, but might be muted much easier by contaminants then PNS. So you'd actyally should be blaming honey dew or the shampoo you are using. People oftwn forget that working with (semi-) coatings requires a lot more attention to which...

Haven't read all the responses, so might be told already. But most shampoos and the CG foam for sure have gloss enhancers in them. These will cover the PNS and mask the water behaviour from PNS. So PNS isn't failing. You will havrle the exact same problem with CQUK, unless you use reload every...

No, Wolf's Chemicals has had this for years wih their nano glaze. Cuts, fills and leaves a nanocoating behind. I have even used this underneath CQUK and it has been going strong for 50000km now. Filling still present en cquk going like day 1, never used reload on top, only washed with Reset

I have tried bodywrap and bodyguard. They reduce the chance of scratches, but not resistant for it. I have it on my car for almost 1 year now ( bodyguard) and still going strong. Just wash it with carpro reset. Don't wash it with anything that contains wax or gloss enhancers as these will cover...

I have used Wolf's Chemicals bodywrap and the new bodyguard on multiple cars, including my own and after 1 year they are still going strong. I use other shampoo's, just avoid the ones with gloss enhancers of wax in them as these hide the coating, and people say the coating has failed... NOT...

Try to go with a QD / spray sealant that goes with the coating. The pinaccle booster, carpro reload,...

Cquartz is prettt easy to use, but there might be easier one, like the pinaccle one, I just don't know if these form a crystallised layer like Cquartz. I wouldn't compound too much and try to do as much as possible with a light polish.

It is very thin these days. Personally, I'd give it a very light polish and put a proper coating on it like Cquartz.

Read the pencil trick a few times,but I can't lt go of the fact that it looks a lot of product for a small section... So, how big would the section be you are going to polish using this amount?

i found this and thought I'd share it here. this applies for any business!

Yes, that is what you should expect. It doesn't bead at all, but it sheets. Only, it does this so slowly on a just washed car, that when the car is lightly dirty / dusty, it doesn't work anymore. CG also advice to top it with V07 or a wax...

I always enjoy your blog en emails. Thanks for those. They have helped me a lot