Recent content by Alekss

I just purchased the PE8 kit, and although I am new to rotary polisher, I really like this unit. Really like the versatility of 1,2,3 inch pads. And yes, I am getting holograms which I am to correct for the most part using the black pad and some finishing polish.

That's what I thought as well, it is seated correctly, and was like that when I removed it. I always ensure the plate is seated correctly before polishing. This polishes has been used a few times now (a few cars) and I did use a 6" backing plate with it as well. The main reason I never used any...

added pics

Think you are correct. I did try once again but after 4 hours of curing and there was far less hazing. Although still some present. A few days later I coated a different car (white in color) and applied CSL, left it to cure for at least 12 hrs before applying EXOV2 and no hazing at all. This...

I thought I had everything seated correctly, it felt like it. And I have never lubricated the felt ring until today actually. As this issue came up I tried searching to see If I can find a solution so the felt ring lubrication came up. Bought some air tool oil, etc. You think it's OK to keep...

I was recently working on a white car and noticed what I though at first was fine black dust coming out of my flex 3401. At first I thought it was coming from the inside of the machine, however after removing the backing plate I notice it is rubbing against the ring gear. Any ideas as to why...

Well, that's what I'm going to investigate next. Curing times, etc.

all good advice...thanks very much

This is what I was following, however I didn't do the whole car. Q: Can it be layered/stacked? A: We do not recommend stacking layers of Crystal Serum over previous layers of Serum (you can but our tests have shown that it doesn't offer an advantage), but you can stack layers of EXO or C2...

All, I'd appreciate your help with this one. I decided to apply Gtechniq CSL+EXOV2 on one of my vehicles. Although I had previously applied Optimum coating I have not applied Gtechniq until now. Obviously I corrected the paint properly, and wiped down all the panels using Carpro Eraser, just...

In this review they actually let it cure for up to 8 min....someone said the residue should be removed almost immediately? Initial Impressions & Application: Gtechniq Crystal Serum Light (CSL) | Ask a Pro Blog

Looks really nice. You mentioned using Flex 3401, Rupes MKII 21...8mm vs 21mm...when do you use one and when the other?

How did you find Audi paint to be....too hard?

Good job on the suspension!