Recent content by BulletBoyz

oh, and the scratches did mimic my direction while removing the wax.

ps thanks ben for the ipa tip, i ended up going with mineral spirits, worked well.

Okay, so here are the picture's, in the first one, under the halogen light you can see the scratches after i waxed, so i redid the door, and while orbiting the door, i noticed two spots where it looks as though it was starting to burn through the paint,i stopped working that spot, i was able the...

I will take some photos today, and i should ad, that the scratches show up with a halogen light on the door, i use it to check my work. to mike, i removed the wax, the same way you mentioned, and the same in your videos, palm down, quarter turn to break the seal then spread out, works great...

My bad, black fire compound

My name is Pete from Calgary Alberta Canada owner and operator of BulletBoyz inc, mobile detailing. just wanted to say hi to everyone out there, and wish everyone a safe and happy holiday. EH CHEERS

I used a black lake county pad to lay the wax on, and a new microfiber cobra towel to buff off, i'm not sure what you mean by a ipa wipe,and i used, black ice compound, (xmt3,2 or 1 wouldn't work) also i did my rear door the day before, and it turned out great using the same procedure i used on...

So here is my question, I have a 2008 black jeep, i was able to compound and polish out all the swirls and scratches, using the porter cable, and the door looked great, then i lay'ed down a layer of wax, and i buffed off the wax, only to notice the door was scratched up again, i re did the door...