Recent content by chewyqc

  1. C

    Question regarding my car detailing

    I've watched some videos from Mike, from Megiuar's and the guy from AMMONYdotcom. So basicly I think of using a polishing pad, prime the pad, put the DA on the car, start it, use about 4 to 6 passes (horizontal and vertical) with low movement speed, medium pressure (and to be sure the pad is...
  2. C

    Question regarding my car detailing

    Well.. I tried to removed them before with Meg Ultimate compound, which is less agressive than m105 and it did not remove them. I were simply wet-sanding the scratches with 3000 grit then I used meg's UC. But the fact is that I don't want to get to much involved with wetsanding if possible :)
  3. C

    Question regarding my car detailing

    Thanks Setec, And for the m105 ? Do I use the orange or microphiber pad ? Thank you !
  4. C

    Question regarding my car detailing

    Hey guys, I'm a big noob here and I want to detail my car. Just wanted to be sure I'm doing it alright here. First off all, my car is a Lexus RX 350 2010. The paint is granite metallic and the CC is soft. It have a lot of small scratches everywhere in the cc. I wanted to do this ; 1. Wash...
  5. C

    Wetsanding through clear coat ?

    Ya, didn't even fell it, I was doing it by hand.. I'l stick w. 3000 :)
  6. C

    Wetsanding through clear coat ?

    Hello guys, Thanks for all your replies, very appreciated. I'l take my car to a bodyshop, hope they'l be able to blend this. Thanks !
  7. C

    Wetsanding through clear coat ?

    I've not tried yet with m105, this product is not available here so I had to order it online. Will probably receive it in about one week. I can see another layer of color I think.
  8. C

    Wetsanding through clear coat ?

    Thanks for your replies, here's picture of the whole door. The damage is a few inches away from the driver door handle. Thank you! Dave P.S I'l try posting a picture with the sun out tomorrow.
  9. C

    Hello guys !

    Hey there, I'm new here, I've started to learn about car detailing only a few weeks ago and I'm here to learn from this big community. I'm from Quebec, Canada. Have a great day ! Dave
  10. C

    Wetsanding through clear coat ?

    Hello Guys, Thanks in advance for your time here. Some month ago, I've buy a 2010 Lexus RX 350. It has some little scraches everywhere so I started slowly removing them. For most of them, I was using a 3000 grit sand-paper with Megiuar's Ultimate Compound and a rotary adapter from 3M that I...
See more
Back
Top