Recent content by dcgocd

Have done my racing on the water with boats NO TICKETS ! I have a Big Block Chevy w/ 11:1 comp alum heads ,roller cam . My son has been to the dragstrip with his 415 HP jetta. That little thing is a monster! Good luck,good looking car !

I was cleaning pad with terry cloth towel after each panel by pushing into the pad while holding polisher against my leg on speed 4 then used the brush to clean off in the same manner I think I had a little too much polish build up in the center and when the brush hit it it just removed small...

Thanks guys , I will adjust my technique and see if it helps.

You are probably right about the divit as product seems to migrate to the center of the pad and when i used my brush the foam in this area seemed to come apart. I am still not sure about the firmness issue seems to decrease after a couple of details I still like the pads and will continue to...

Looked at a 1968 Camaro Z28 style restored and painted last year with PPG paint and 5 coats of Dupont clearcoat Painter wet sanded and polished out car with a rotary. I inspected today with my Brinkman and only found 5 light scratches on whole car which could easily be corrected with a light...

I like my 5.5 " LC flat pads, but have had a couple of issues with the white pads. When cleaning on the fly ,I used my orange Wolfgang brush and a terry cloth towel to clean on the fly an noticed some of the pad fell apart in the center leaving a 1/2 divit in the center . Can I still use a pad...

I like my 5.5 " LC flat pads, but have had a couple of issues with the white pads. When cleaning on the fly ,I used my orange Wolfgang brush and a terry cloth towel to clean on the fly an noticed some of the pad fell apart in the center leaving a 1/2 divit in the center . Can I still use a pad...

Nice review as usual ,Good luck in your new endeavor !

I have used Megs Ultimate Liquid wax and like it a lot but it can be a little finicky to work with . ULW gives a harder colder reflection I use BFWD now and to my eye ,it gives more of a carnauba look which I have read Wolfgang look is similiar to BFWD. It gives a deeper darker reflection...

:iagree:

Megs clay kit Lake County 5.5 " Flat Pads M105/205 BFWD

I want one Im the MAN

I did a pearl white Acura recently and noticed my Brinkman didnt pick up things too well . I installed one of those 300 watt energy saver bulbs from Home Depot in the overhead socket and it worked great for the hood top and trunk,showed every swirl.

Once the sap is left on there long enough to reach the base coat,your done.

I am a big fan of Blackfire White Diamond Paint Sealant. It looks great on Black after claying and corrections. As you are also a Blackfire fan, what would you say looks different between Black Ice and the Blackfire Wet Diamond as far as gloss and appearance ? This might be a difficult...