Recent content by Dombey

I have a convertible and I've been trusting CG InnerClean lately. Easiest product to use that I have tried, perfect finish, UV protection, all surfaces. Sent from my iPhone using Tapatalk

Can't you rewash and see what happens? Sent from my iPhone using Tapatalk

Mmmmm. Is the Porsche black that soft? Are you straight black or one of the Metallics? I have a 2013 aqua blue boxster and I have never noticed any swirls on the paint (to be fair, half the car is covered in Xpel). The wife is in the market for a cayenne or Macan, she looooooves black. Sent...

Did you find them all easy to work with/apply/remove? Sent from my iPhone using Tapatalk

I have used gold class spray on my Porsche for nearly a year with great results. Goes on shiny and a few hrs later looks just like oem. Sent from my iPhone using Tapatalk

Amazon... They stock a lot of items with Prime Sent from my iPhone using Tapatalk

Yes...but soft water spots are cake to remove relative to hard water spots. :) Sent from my iPhone using Tapatalk

Don't let them get dirty in the first place! Hit them with the brush tip on your vacuum every wash. If it is already dirty...a lot of cars you can literally just pull the vent out (carefully). Usually a couple of spring metal tabs holding them in place on the sides (use a prying tool). Once...

Recently I have found that my car looks 100% better with a coat of D156 after every wash. I've been sheeting it, blowing out the crevices and majority of the water, then using a regular old microfiber, pre-sprayed with d156, and a very very light spray per panel, I dry it off. No other...

Thanks for the recommendations. I've got some CG VRT on the way via Prime... Will tackle the top w APC and refresh my coat of 303. Thanks!! Sent from my iPhone using Tapatalk

Hi all, I have a convertible with a black top and I got a bit of polish on the fabric (amateur move). Now I've got this whitish crap on the fabric. Second, I have some plasticky rubber trim that looks like it could use something to darken up the black, but the material itself seems extremely...

Interesting on the soft water. I use my soft water tap when washing the car, so maybe that is why the honeydew works so well for me. Sent from my iPhone using Tapatalk

Well I have no experience with a standard gun...I have a cannon, but the CG Honeydew works great. Sent from my iPhone using Tapatalk

Would this work better in a pressure sprayer? It can you put it in a small sprayer that you pump full of air, and have a hose/wand/adjustable nozzle to get right up on the face of the rotor? Sent from my iPhone using Tapatalk

Well maybe the best way is to sheet with DI water, master blast it and be done. I personally keep a good wax on the car, rinse a ton to try to remove any surfactants, sheet it, then use the master blaster. I do have a few water spots here and there, but I use the soft water tap so they wipe...