Recent content by fly4food84

My tires are about a year old and I cleaned them with Tuf Shine tire cleaner several times, but I've been using chemical guys VRT bimonthly and a couple days prior to tire coating the dealership put some of their junk (unknown type) on it. I thought I cleaned them well (day prior to application...

Awesome thanks for finding this link. It is most likely that I didn't let enough time go by and/or scrub enough for it to bond properly. I'll give it another go once I get it clean over a period of time.

I applied this way too thick I think and 24 hours later it's peeling a brownish substance. I thought I cleaned the rubber thoroughly, but clearly not. I'm using tire cleaner and a stiff nylon brush to chip away at it, but it's tough. Any suggestions?

Some coatings, such as PBL actually do well with a coating and I'd imagine DS too.

I've got too many detail sprays that contain some sealant (V7) and wax (Adam's), etc. I'm going with PBL Surface Coating for piece of mind. I'll use the booster once a month or so.

I'm considering returning this Blackfire coating since it can't be washed or sprayed with detailer spray.

Can chemical guys V7 or detail spray with a wax be a no no with this?

If you apply BH by machine and EX-P by hand you shouldn't have a problem.

I'm familiar with 303 and it works well, but streaks after a light rain, even after buffed. Klasse doesn't streak and offers a lot of protection for paint, so I'm curious about for vinyl. :) I've been using AIO on almost new trim and it looks great, I'm hoping SG will do the same, but does it...

I know Klasse AIO is ok for trim pieced, but is the SG as well? I want to protect the vinyl from the sun as much as possible and for as long as possible.

Tomorrow is part #1 of the big detail. I'm planning to do the following: Wash, Clay, Poorboys SSR2 (PC set on 4.5 with polishing pad), Klasse AIO (PC set on 3 with finishing pad). Wait 24 hrs... Poorboys EX, Wait 24 hrs... Adam's Americana.

I haven't had that problem, but I just spray a liberal amount on, then buff off with a microfiber. If you want even more protection, use Klasse AIO.

Thanks for the reply, but it still looks the same ???

I received a bottle of the beloved Wolfgang v3.0 last week and attempted to squirt a bit on a Cobra foam pad today and the contents were not mixed well, even after a few good shakings. Some of it was yellow and parts were a greasy orange and dabs of a whitish substance. Is this normal or did I...

I love Autogeek.net