Recent content by GeO2110

Hi again to all people. :buffing: Have a PC and i trying to detail my car. A 2006 mazda 3, Cooper Red. Since i'm in Guatemala, i don't have a large suplies, so what i have before my second buy is: PC 7424 LC Orange pad 5.5'', LC Blue pad 8" Bad choice LC White pad 8" Bad choice too 3M...

Hi, thanks for all the advise that give me in my effort to make my car brand new... Last try I made holograms, or little swirl marks from my swirl remover, well after a long search finally found 3M UltraFina SE, so need and advise please.. Should i proceed like this or please let me know...

Nope, there isn't.. It's really sad my limited selection... Well after all your help people, I buy Scratch X with the white pad, it seems to do the work.. I will try to find all the products you recommend me to try to get it work.. I will try the photos later, to see if is more helpful...

Well, after a long search and all of your help, i find out that i need a last step, 3M UltraFina Se (06068) that is NOT available here in Guatemala. What they have is the 3M Final Haze (6066), could this be my solution to remove the micro marring or the holograms that i made with the swirl...

I think here is not available Meguiars Color X, and the finishing pad i have is the white pad.. What i have is the 3 steps of Meguiars i think this could correct this, but it don't.. I have a orange, a blue, and a white pad... Here is available, hand glaze and scratch remover from 3M...

Well, read in the forums i guess that my problem is marring or haze. Could be that the scratch remover from 3M removes the marring left by the swirl remover???

Thanks to all you people... I check the videos before i start, but the 3M product, is kind of strange, i don't know if i apply to little product, because it dry so fast... Could be that i need a finish polish??? Like when you begin with compound, and you have to do swirl remover made by the...

No i don't apply was with the PC, since i don't have a gray pad, just take it of with a MF Boonet, when i remove the wax doesn't look so much, so i think the MF was dirty or something and it try remove it with and meguiars quick detailes, and there was when i see that i remove the big swirl, but...

Sorry for the photos, i will try to take them with my camera, does are from my phone 2.0 MP. I thing they are swirl left it by my polish, do i doing something wrong??? Could be that i not putting enough product, so it dry too fast??? I'm so confuse now, i don't want my car like that... :eek:

Hi, again from Guatemala, finally get my PC and pads... Have a Mazda 3 Red Cooper, what i did was: 1. Wash the car 2. 3M Fine swirl remover with LC Orange pad at level 6 with the PC 3. 3M Fine swirl remover with the LC white pad at level 6 with the PC 4. Step 1 of Meguiars 3 step wiht LC...

Hi to all people, very nice place here... In some word my history, my car have son swirl like almost everyone car, so buy a 3M Swirl remover, work it by hand, and mess up my clear coat, with a lot of swirls... By far the paint, look amazing, try to put some pictures.. Well, i have the 3...

Thank you, would be fine if i try first the LC blue pad + Step 1 of Migueres. By the way, does the Migueres 3 step, are ok for the PC and the LC pads??? Feed back please :buffing:

My advice, from a newbie too, is that you shouldn't try to remove swirl by hand, with an abrasive, i use 3m swirl remover and put more swirls.... Now it bothers so much... Hope it help in some way... :cheers:

Hi, well my first post, buy my PC, hope receive it on Monday, to try to remove the swirl marks that have my car.. About my car, is a Mazda 3, 2006 Red Cooper Mica.. Lovely color... The problem was that was some swirls marks, buy the 3m swirl mark remover by hand, and you can imagine how i left...