Recent content by JAMM0N

yeah it was a really fluffy one. i'm going to try the MF cutting pads from megs to see if they work better. i'm just trying it out so its a trial and error for me with the GG6. if I had the flex that would've been I had good turn out with the Subaru. but was having problems with hard paint cars

GG6 the car that iw as working on was a chevy trailblaer. i've tried the method of spraying QD on the wool pad before working with it, but that just made the wool pad dust a lot more and 0 progress. i'm assuming it was too aggressive combo, i have to get back to working on that car again.

darn. well i guess ill be putting this pad away for this car. ended up using a 6.5 LC orange and a 5" yellow.

hey guys i was wondering if anyone had any luck w the wool pads? ice tried a few and its left micro swirls in the paint and dusts like mad crazy. i followed the usual steps of applying it on the panel and even using compressed aur to clean the pad. i didnt leave a haze it left microscratches...

didnt work out the way i wanted. tried to find a 1/2 male to 3/4 male and it still would thread into the wand. just want the wand fitting nothing else because the threads are doible sided it looks crooked.

yeah still testing. i used these products using a 5" pad with just orange pads and wasn't sure if i touched any of the red pads and it worked a lot better then the 4" pads that i'm using now. tested on a subaru trunk that had huge swirls in it and the color was white. because i'm doing these...

whoops i screwed this thread up a tad. anyways i hope this isn't a problem as its a journal and i'm not sure if we have them set up in our profiles for this kind of stuff but i'll just keep posting my results. GG: speed 4 Yellow Pad: 700/721/778 Section one: light swirls Section two: light...

reserved 3

reserved 2

reserved 1

subaru sideskirts. CBS testing CG 700/721/728 pads: 4" Y/O/B lake country pads

ill try and find a lowes here. homedepot and menards

yeah i am looking for the brass fitting not the silver one i just need that attachment at the end of the wand.

if i replace the wand i want to have the fitting at the end. i might just order one online i guess if i am not able to replace the gun and wand. just looking for options cause the 3/8 fitting i used at the end of the wand didnt work out the way i wanted and yeah leaks -_-

i killed the threads in my wand so i was wondering if there is a replacement for the whole thing or something better that will work with the quick disconnect. i dont have the fitting that came with the wand when i bought it used. so i'm using a 3/8's x 1" as a replacement but there's too much...