Recent content by keo

Thanks Mike!!! So given both posts this morning, I should skip the Spotless and Nanoskin, order the LC 5" BP, 5.5" flat pads, and Pinnacle Paintwork Cleansing Lotion? Does a GG 3" with the 3M Trizact make any sense at this point? I have a good stock of the LC 4" CCS pads.

That's hugely helpful. Thanks! What kind of solution do I use with the Trizact? Normally when I wet sand by hand I use soap and water. I'll post up pics afterwards.

Does a PC7424XP help at all? I have access to one but don't have any 5.5" pads past LC white. Seems like I would still need something heavier. I also have Menzurna PG, IP, and FF if that would doing anything here. I get that either I need to go down the Spotless / Nanoskin route or wet...

Ok, so that's what I didn't understand about your post and still don't after this above explanation. Is the acid supposed to eat the clear or is that done with the Nanoskin? I can't feel anything on the paint, meaning my paint is polished smooth but the spots are still there. The post from...

So after the wash / clay / Spotless treatment, the spots was still etching in the clear coat and that's where the Nanoskin came in?

Interesting... I'll check it out. Thanks!!!

Hi Mike, Thanks for the response. Answers: What size are the pads? 5.5" thin pads or the larger 6.5" pads? The Yellow and one Orange pad was the old 6.5" CCS type. The second Orange pad was the new 6.5" pad. The White pad is the old 6.5" CCS type. The Black was the newer 6.5" pad. First...

Hi all, I need some direction / advice on how to remove Type II water spots on the trunk panel of my 2003 Z06. So far I've done: 1. Wash / Clay 2. Polish with Griots Machine Polish 1 with a LC Yellow pad 3. Polish with Griots Machine Polish 2 with a LC Orange pad 4. Polish with Griots Machine...