Recent content by molarman

thanks for ur input

anyone have any experience with cr spotless rinse system? am wondering if its worth expense; instructions say cant use if h20 temp is 90 degrees; also do u have to drain after each use if only use every couple of weeks? here in dallas, its very hot , so am wondering if this system is worthwhile

thanks for all the advice; yes, next time ill do a test spot and check in the sun

just detailed 2015 lexus es350; thought i had done a nice job,but seeing the car in the sun can still see light scratches; is this paint/clearcoat considered "hard'? used clay, wg polish with flex and white lc ccs pads

hard to beat wg 3.0 paint sealant (after washing, claying, and polishing)

lake country ccs pads work well with the flex,and also lake country hybrid pads are highly recommended with the flex

ur right the lexus autos seem to have hard paint/clearcoat; have had 3 lexus and it seems to take some more agressive polish/pads to get a really perfect surface; everyone on this forum recommends try a test spot with less aggressive pad and polish,u can always move up if needed

have noticed some of u recommend using hybrid pads vs ccs pads when using flex polisher. here in dallas it gets really hot, so am wondering if need to change pads more often since they seem to get hot quickly; paint surface gets hot even under the carport

amen to the rag company

try watching junkman2000 on you tube; i love autogeek, but junkman explains in great detail re: microfiber and waffleweave towels; just bought several from the "rag company" which are made in korea, not china; also, they are less costly than here at autogeek

thks, am going to use it on daughter's car this weekend

also have that issue with sealant; guys on this recommended spraying pad with aio cleaner, then soaking pads overnight in hot water with dish detergent; tried it, and it took couple of times to remove sealant; so from now on will blot excess with terry cloth and store for next use

anybody tried this uber all in one? do u need to apply sealant afterwards?

do u need to dilute ur regular soap when using the foam gun? i used the dp soap and it seems too runny when mixing as per directions

thanks for the input