Has anyone taken before after depth measurements? I have done a couple of these vehicles prior to getting a depth gauge. Now that I have one I am nervous to do the same process as the ones before. I am measuring a white Toyota Camry at 1.7mils (average depth) I know the single stage paint is...
Keeping the surface lubricated is key when claying. If I am in direct sunlight or it is a hot day and the lube seems to dry quickly, I soak the panel with water which does two things; It cools the surface down unlike a mist of lube, and it provides better saturation of the panel when combined...
Pop up tents are basically useless unless you have a hand setting up and tearing down. Also, if you use them please use leg weights even if there is no wind. True story, I was detailing a car under a canopy (before giving up on them) there was no wind when I started and it only took one strong...
I am trying to make an effort of being more active on the forums. So here goes:
I do a lot of engine bay detailing for my customers. I like the write up Mike did here. I use slightly different methods currently but will incorporate some of the methods taught here.
My thoughts:
I do not...
Have you tried a metal polish? Does the corrosion seem to be below the coating or is it rough on the surface? The issue I would see with sandpaper is these running boards are coated with chrome and sanding them down could end up making them look just as dull. I would start with a metal polish...