Recent content by patricemougeot

Hi. I want to know if it's possible to install a 3" backing plate and use 3" pads using the 12mm option on this cordless tool. Thanks Pat Sent from my Nexus 6 using Autogeekonline mobile app

Hi Mike, Just bought Menzerna Heavy Cut Compound 400, Menzerna Medium Cut Polish 2400 and Menzerna Super Finish (SF-3500) with the following pads Lake Country Hybrid Power Finish 5.5 Inch Foam Pads Grey, Orange and white (6 of each)

"If you don't see me ever using it then there's probably a reason" LOL I hear you Mike. Thanks

Hi Mike, It was nice seeing you at SEMA this year :). Always a pleasure . I have a question that pertains to the book specifically at page 28. You have the recommended compounds and polishes. It starts with Pinnacle, Optimum, Menzerna, Wolfgang, Meguiar's, Blackfire, Sonax and finishes with...

You change them both at the same time

Warning signs is that when you press the power button to turn the machine on sometimes it will power the machine sometimes it will not, or when you are working with the machine the power will skip. You can easily change the brushes yourself. You have 2 screws on each side of the machine. Just...

Hi ScottH, I bought mine around end of April. Replaced the brushes once around July. So I would say all depending on how many cars you will be doing. from end of April to July roughly 3 months past by and I had done 15 cars during the week-end only. So that roughly 14 week-ends at around 1 car...

I have the BOSS21. One thing comes to light with the BOSS21, the brushes wear out fast. This is an issue Griot's is working on to solve. Make sure to buy some extra one's. But as far as the tool itself is concerned it's an awesome machine. I also have the Flex 3401. Nothing beats that machine...

I use a the Flex PE-14 which is a rotary polisher. I have the soft 3 inch backing plate. Just looking at my options for the best cutting pads to use with it.

What would be the best DA polisher for 3"?

Wow thanks for sharing all this information. I really appreciate it. Gives me a pretty good idea of which brand to buy next. Would MF pads be suitable for a rotary with a 3" soft backing plate? Or should I buy a DA that will have the option of installing a 3" backing plate?

Hi, Which 3 inch cutting pad would be the best in either microfiber or foam? Thank you

Hi GSKR the color is black. Sent from my Nexus 6 using Autogeekonline mobile app

Hi Jeremy, The F-150 looks ok. Not a whole lot of swirls, just a little. Why the 2 steps. The customer doesn't want to have the interior done.

Hi All, I need to find out what to charge for a 2 step process for a 2017 Ford F-150 1- Foam wash 2- Decontaminate paint (Nanoskin) 3- Tape the whole truck 4- Polish 5- Seal/wax 6- Dress tires 7- Clean exterior windows I don't do the interior nor the engine bay Thanks