Recent content by ps2cho

I have these blotches/spots…tried twice with a microfiber and rinseless wash and it didn’t touch it. want to be cautious now…what could these be and any suggestions on what product to try next without damaging the plastic or making it worse?

Thats a good thought....what I could do is throw them in the bucket, then when its full, fill it up, and soak for 24hrs. What dilution should I use for APC for microfibers thats safe? In the washing machine I am using Rags to Riches

I want to begin using a drying aid such as bead maker...I keep reading though that these are going to over time make microfiber towels useless. Would a general strategy of having a "Dirty Microfiber" bucket that has water/rinseless/APC in it and throw all dirty towels in there until its time...

So in DA mode, does your have any ability to polish? I feel like mine just stalls and it couldnt even do a finishing polish.

Thanks - I'll give the rotary function a try. I have the Rupes LHR75e which does almost all other areas, so I don't have much to do, hence not wanting to spend $650 on the rupes

I recently purchased the MaxShine 2" polisher and the youtube reviews dont seem to show it stalling much unless there is a decent amount of pressure applied. Unfortunately I received mine and a small amount of pressure stalls the thing, its really unable to remove any paint swirls at all because...

Hi all- So on my older Mercedes, I used some leather cleaner on it, and noticed that it immediately started pulling the leather dye off. I ended up replacing the steering wheel (it did have 170k worth of wear...)...but I learned my lesson to be cautious. I have since purchased a newer BMW with...

Perfect that’s the “fix” I was looking for! That’s the issue now I think about it- it basically suctions on and won’t let go which makes it hard to move. So just make a couple small drill holes and add more as necessary?

I have a 5HP Dewalt shop vac but I find it’s too powerful, as soon as I touch the carpet it just wants to pull the carpet off… is there a way to work around the suction power, or should I purchase a smaller vacuum system for vacuuming up every day dirt from the carpets? If so, and money was no...

Ok thanks for the input. I guess this is why I need to get my new Audi ceramic coated asap while the mileage is low!-

I looked today down the side of the car very carefully and I think you're right - I dont see any "speckles" down the doors etc, it just seems to be on the hood and roof. So even though I can't feel it with my nail etc, its too deep for any sort of correction? I ordered some CarPro Eraser to...

Thanks that's helpful for some direction. It was there long before I used M105... Paint is 040U Black. I know the clearcoat is hard because Ultimate Compound didnt even touch the swirls whatsoever. I did this small test area with my Rupes LHR75E, but I have a larger Porter Cable DA once I get...

I'm working on a complete paint correction on my 2008 MB E350 with 150k miles - 040 black paint. The results from the video are after 2 passes with M105 on a Rupes medium microfiber cutting pad, and finished with 2 passes of Sonax Perfect Finish with a Rupes yellow foam pad. As you can see, it...