Recent content by Seeker

As long as you don't eat it, its fine. A minor oxidation of the product is expected, so do a test spot if it's fine then you are good to go.

Try to use the same carrier/solvent in that Teflon polish. I believe it could be kerosene, try to obtain the MSDS. Assuming its kerosene, let your pad soak with it then clean it with soap. Another option (I dont believe in its effectiveness), is to use fabric softener.

Buddy, if you love your wife then you wouldn't like her getting miserable over a junky car that stale for no reason. I'm exaggerating a little bit, but you get the point. Reliability should always be your first priority and defiantly not the paint (whether it *POPs or not)! It might be me, but...

If you are trying to achieve that bright effect, try any Oxy cleaners it should work. Also, if you want the easy way, then any optical brightener products should do the trick.

I have to agree with GSKR, you just filled the scratches with a white polish. (You can confirm that they are below or equal to the paint surface, otherwise they could be splatters). Anyway, you really have to work hard to get these fillers out! They can become as hard as concentrate, if you let...

None. Technology advancement, market competitiveness, and full stock of out-dated products to trash...

Possibly no. Try wet-sanding then polish the area. If it's gone, then that's your 2nd finest detailing job. ;)

Just a little bit of an update to this thread: I have never seen anyone talk about splatters of polishing compound! Literally, it flew everywhere! This made me clean most of my car again, and I would really recommend that DO NOT LET IT DRY! I skipped couple of of these little splatters and said...

This is somehow late, but anyway (just going to post it for the record): If possible I'd turn on the heater on maximum and redirect it to your feet. I'll keep the windows closed and after half an hour, I will partially open the windows (don't worry, water doesn't need to reach 212F (100C) for...

I am extremely sorry for my late responds here. It kinda embarrassing not to respond to my own thread in time. Please accept my apologize on this matter. :) @ViperGuy21: Thanks man for taken the time and being the first to answer me. :) I'm getting things shipped, and with the time that I hope...

Hi Everyone :) I decided to go with rotary polisher and to use the following polishes: M105/M205/SF3800 The pads (or sponges) and the color system is getting me extremely confused! Could you recommend me a suitable pad for each polish? Just for your information: I'm attending to correct 2...

@dlc95: Thanks for your answers. I just realized that pads contributes into cutting (I though it depends on the polish type). Either way, as I am getting wax/sealant answers. My idea that, after I got the polishing part done. I'll be using Klasse AIO and the sealant one (so, I am trying to...

Hi everyone :) I spent lots of time reading in this forum, and recently decided to get my hands dirty and up my game with detailing. Hopefully you could get me in track and on budget for a good set up (Polish, Sealant and Wax). For now, I got many things that confuses me with polishing. It...