My question would be how long before I begin getting a nice red tint on the buttocks of my khaki pants...I would wager the first time I was in the car for more than 20 min. Lol.
Sent from my SM-G955U using Autogeekonline mobile app
Here is an example of the types of amazing results you can achieve with 3M's Trizact 1500/3000 disc combo followed by a buff/polish. These are before and after photos of a a black hood that I leveled some orange peel on after a respray...pretty much speaks for itself. If done correctly, the...
If you want to view it that way, but the point remains the same. Just as ONR is not meant to extend oil life, 303 is not meant to extend tread life. You would need to coat tires regularly with a very durable/flexible material (think rubber) to come anywhere close to improving tread life by even...
All I'm saying is that the claim he's making is the equivalent of saying that putting a few spritzes of ONR in your intake manifold every 1k miles will make you not have to change your oil for 20k miles. It's a novel idea, but physics won't allow it.
Qualifications for my claim:
Engineer for...
If this were the case, 303 would no longer be in business because they would have either been bought out by Big Rubber or "disappeared" by them. Ha ha.
Sent from my SM-G955U using Autogeekonline mobile app
I'm curious as to how you captured/calculated the pressure values? Not second guessing your findings, just interested in how you got to these values.
Sent from my SM-G955U using Autogeekonline mobile app
I had something similar happen to me when applying WGDGPS 3.0. At some point during my first of 2 coats I managed to get some splatter from the DA which I failed to spot during buffing. I proceeded to apply the second coat, also without noticing. It was only during the buffing of the 2nd coat...
You could try to wet sand to reduce and buff/polish after, but honestly that looks like it may be too deep to fully correct without going through the clear.
Sent from my SM-G955U using Autogeekonline mobile app
I was able to clean the projector lens back face last night, and it turned out well. I don't think I'm going to worry about disassembling the housing, as it's not too terribly dirty.
Sent from my SM-G955U using Autogeekonline mobile app
I'll probably stay away from the alcohol, in the event that the lens is acrylic and not glass. Alcohol has a tendency to cause haze on plastics.
Sent from my SM-G955U using Autogeekonline mobile app
Yeah that's what I was thinking. I know where the leak was (which is responsible for the hazing) so I'll get that sealed up, but I just want to make sure that I don't use anything that will leave residue or contamination.
Sent from my SM-G955U using Autogeekonline mobile app
Bulb-side. I can disassemble the light, I'd just rather try to clean it through the bulb socket. I've heard of people attaching microfiber to a dowel and gently cleaning through the socket with slightly soapy water, but I wanted to see what the forum's thoughts on this topic we're.
Sent from...
I'm installing a new HID/LED LO/HI combo for my headlights this weekend, and during the disassembly I noticed that I have some pretty heavy hazing on the internal face of one of the projector lenses. Does anyone have any experience/tips they could share on an effective method for...
I've used my PC for color sanding with 1500/3000 grit trizact and it works beautifully (I used a low-orbit pneumatic finishing palm sander for the final cut). I will say that I would expect it to be very slow, when compared to just using a rotary.
Sent from my SM-G955U using Autogeekonline...