Recent content by Superior detail

Go with the Flex. You get what you pay for in this industry. The Flex is by far the better machine in most any case. Anyone, that says differently has not experienced the full dynamic of the Flex tool. I use the PE14-2-150 Rotary by Flex as well as the XC3401DA. I use the Rotary for most all...

I agree with the above post. I would recommend Menzerna Power Lock Paint Sealant. Also, if you would like extra gloss and the ability to hide some of the defects, you can apply a glaze on top of your wax, it is a little extra work, and a glaze will only last for 3-4 days, but the gloss it will...

You can get a suede cleaning kit (brush & eraser) at CVS for about $5 bucks. Jaeson Lane Superior Detailing 858.349.3135 [email protected] www.superiordetailing.webs.com

Hey, you'll want to get a suede cleaning brush, and a suede eraser. Cleaning suede isn't so much about using a chemical as much as working up the nap in the suede and then brushing out the grime. Cleaning suede at home does have its limits. Not all suede is prepared the same, either, and much...

I recommend Menzerna Finishing Glaze PO 115 C . You can purchase it through Auto Geek. Good Luck! Jaeson Lane Superior Detailing 858.349.3135 [email protected] www.superiordetailing.webs.com

In my experience more passes can equal just enough to make it perfect and then a second later it needs to be re-painted because of burn through. I recently read an article where Mike Phillips mentioned a posters signature that he had liked. The signature was something along the lines of ,"...

I recommend doing the process over again. Especially if it has been beaten up all winter. If the process is too tedious, seek a pro's help. As for trying to cut corners by using a compound with a finishing disc or a polish with a cutting disc, this isn't really how the products were developed...

Ok, so first off, my WARNING more than advice is to definitely not wait a year, in fact get those off asap. Those spots are most likely hard water spots. Depending on what is causing them, they may etch themselves into your clear beyond repair. Although seemingly drastic, polishing water spots...

For deep RIDS, you may even need to wet sand. A rotary can definitely improve the aggressive quality you would need to get deeper into the clear, but remember that if you are not very experienced with a rotary, then trying to polish deeper may cause you more problems than you started with. I...

For longer lasting protection with just as much shine, try Meg's synthetic sealant 2.0 or Wolfgang's sealant. Meg's Wax is always a good choice, but I find that you have better longevity for protection if you go with a sealant instead of a wax. Just my 2 cents. Jaeson Lane Superior Detailing...

Sorry, reprinted should be repainted, ...auto correct. Jaeson Lane Superior Detailing 858.349.3135 [email protected] www.superiordetailing.webs.com

You should be safe to polish it with your PC. I would only be really worried if you took it to a non reputable paint shop that did shotty work. The other worry is if it was painted with a single stage type of paint. If this is the case then you would still be safe to polish it, just need to...