Recent content by zckid

it's a combination of polish, the felt, the action of the rotary (around 1400-1500 rpm) and the pressure applied. yes

thanks mate. The whole process took approximately 4 hours. You have to proceed gently and slowly because of the heat build-up

check this out https://www.autogeekonline.net/forum/auto-detailing-101/111623-operation-clear-view-wiper-marks-swirl-removal-glass.html

Hi folks Been inactive for long, Anyway, presenting to you 2 cases in one: 1. Persisting with wiper blades that are long past their prime 2. Using amateur techniques to remedy damage caused by bad wiper blades that have actually worsened the driver`s line of vision Torn wiper blades or...

Thanks a lot everyone. Your encouraging words most appreciated :) It’s a dream come true for the owner.

Thanks guys :) In terms of look, may be. We have very few Acura here, mostly Accords.

Thanks a lot Pal Thanks Spiros. Yes, it's the Nighthawk, had to finish with flex 3401 to remove all holograms. it's the softest paint we have here, most sticky i'd say. I tried all sorts of tricks to remove the polish residue but it marred the finish. I ended using hot water with the softest...

just under the ACCORD badge may be someone wanted to steal it or ....??? the glass with water spots and smearing close-up After correction.... The glass has some deep scratches which unfortunately, Moving onto paint correction.... the beads of product The bonnet...

Hi friends! Greetings from the sunny Mauritius. This Nippon lady came to us for an enhancement. The car was in good shape in every way apart from being rather wrongly cared for in the paint department. It had a previous detailing job somewhere and a few visits to local car washes. It had...

so beautiful Nice job as usual Mike :)

super glossy. well down Mike :)

Thank you Jowillie. Glad it may have helped you. :) Thanks buddy. Much more than that, 7 days including "overtime" . actually more than 70 hours.

The next morning GTech C1 crystal lacquer was applied with supplied applicators and left to cure according to recommendations. Then it was topped with EVO and left to cure. I had no time to take the car outside for pics. Coating done Mirror or glass...

underway. The swirls that are visible usually hide other defects, Once the swirls were removed, I proceeded with a thorough inspection to settle on ways to remove those and enhance the paint without compromising the clear, especially as this baby sleeps under the stars. The aim was to remove...

Hi guys! This beauty came in for a paint correction that would ultimately end up in an extreme makeover prior to coating installation. Actually the owner had to wait for 1+ year due to construction work at my place. In the meantime, we became friends and exchanged ideas about what could be...