Search results

Funny thing about the HF unit. That thing is a workhorse for as cheap as it is. I bought one while in Florida on vacation to work on my parents vehicles. I got put on the spot last time to detail a Mustang that was inherited. I only had the HF unit. I use IGL coatings so I called my guy, got...

Am I reading you are doing this by hand? If you are, you will have inconsistent results at best. Oh, and your arms will fall off.

I'm wondering about punching out my own. No way can you use the standard thickness so how do you punch it and thin it out?

There was a thread on Facebook in regards to someone using MS to prep a tire for Black Pearl tire coating. Seems others are doing this.

I really need a rupes Ibrid, too bad polishers are excluded :(

I have the 7000 model, can't go wrong other than each lift is HEAVY. The picture shows a guy holding one in each hand, don't get confused, he is holding the 3500lb model which is a significant amount lighter. I have learned one thing, don't take the tires off and lower it completely. It can't...

Probably a little late, i have a mytee II and have no complaints.

I too have the cheap $70 or 80 unit from amazon. I bought it to have for the new year. I have used it a ton in my house. I have 3 dogs and the weather goes from frozen ground to rain to frozen ground so I pick up some dog scent every now and again. I run it on my first floor for 2 hours at...

Decals are no issue Sent from my SAMSUNG-SM-G930A using Tapatalk

I thought Meghan left AutoGeek?

I usually set my on a detailing cart, or my washing machine, trying to avoid the ground at all times. If I am working outside, either my cart or front porch.

When you sending it out? I need to coat my Hellcat before winter storage comes. I'd like to get it done sooner than later here in Ohio, rinseless is ideal here in NE Ohio!

I too have bumped matte stripes with a fine polish, it did shine them up, which was the problem since they weren't supposed to be shiny!! In your pictures, I admit that looks great, but matte should stay matte. No sheen to them at all.

If you are machining matte stripes you might want to rethink that, they are supposed to stay matte. I tape off, polish the paint then coat them as well as the paint. Test somewhere out of site if possible. I did a PCP Hellcat and pulled the plate, tested behind the plate before moving onto...

Wow, this a like a wayback machine for me. When I first bought my 300SRT there was a "chat" feature on the Autogeek store page. I used it to ask the same question. In fact I think it was Nick who helped me. He suggested TSR-Finishing Glaze-Polish Enhancer before I applied my Fuzion. I used...

I guess I would want to know if the 6" plate on the updated 3401 will work on the "old" unit so you can use all of the backing material. I've not seen anything on that though.

I asked Lake Country about the new pads and the lack of the old Hybrids, this is what I got back. I did have a 6" BP for my 3401, part of the interchangeable system. Well my 6" plate broke. I do not like how the small plates fit on the force pads. John, Our plan was to replace the Hybrid...

They are popping up on my facebook feed. I believe they are based out of Pennsylvania.

IPA removes it from clothes, been there, done that! I wouldn't worry about cloth upholstery.

Ok I don't like how the factory plate leaves so much Velcro showing. That is what I switched to. Lake county said they went to that size because the new flex factory plate, I'm guessing the large orbit machine, has a larger plate. Sent from my SAMSUNG-SM-G930A using Tapatalk