Search results

it also helps even the outcome visually. Less streaks:xyxthumbs:

Our American Bully Indy

just blew up a 12x6, 3 row inflatable pool in about 30 seconds. :xyxthumbs:

an old item i just found while cleaning up 'MY' basement area. I never noticed how the vanity cover has two different textures. This really shows it off. I just removed some white plastidip for this. :xyxthumbs:

you can get the handle, hose and tips on Amazon :xyxthumbs:

a soft covered magnet should at least tell if it's a ferous metal?

How about using the new Meguiars thin pads with the PC. May be less expensive than the Flex if that matters.

I've heard of spinning the pad dry on a rotary but is this same procedure advised to do on a DA? Seems like more stress to the hook n loop backing on a DA than on the rotary. I 'thought' this was one reason it's been written to not lift the DA until the pad has stopped spinning? Just throwing...

An old product from back in '12 :xyxthumbs:

That's a foam gun. Similar but different as the foam cannon uses more pressure.

I've had both the WT & Husky liners and both work equally well. The Husky liners are slightly less expensive. Can't go wrong with either imo.

same here:xyxthumbs:

Advance Auto. Not Advanced Auto :xyxthumbs:

NVM. I answered my own question. The bad spots will still show through the clear so i must remove all

our factory wheels are clear coat over silver. I believe they are aluminum or similar. The clear coat is peeling in some areas and nonexistent in other areas. I was knocking some of the oxidation off with steel wool as it was easier than wet sanding. I wanted to smooth everything out then hit it...

the old over the shoulder hose holder method :dblthumb2: Thanks for the review!

/\/\ Shameless picture plugs /\/\ :dblthumb2: I'll have to give that BRS a try with a rinseless

scratches are hard to get out of textured plastic. In for the answers :props:

cool. That's what I was going to add as that's what I did and my pad did that too :xyxthumbs: ok on a rotary but not a DA

could I premix and store the entire contents in one of these that i have sitting useless: Plastic Drum - 15 Gallon, Closed Top, Blue S-17007 - Uline. I was thinking of setting it on blocks and putting a tap on the lower part to dispense. Deluted down to a rinseless, I wash one car once or...