Search results

Optimum hyper polish. Sample bottle of Wolfgang 3.0 glaze. Have a bottle of 303 finish polish on the way due to the double sale. A few meguiar's white and black thin pads and a few LC force white and orange pads.

Car in question is a 2015 CX-9. Paint is overall in good shape with some RIDS and chemical spotting on the roof. Perfection is not the goal, just cleaning the paint and minimizing defects. Only looking to use a polish, no compound, to preserve clear coat. Have access to 8mm and 21mm DA...

Meguiar's UFF. Very durable and easy to use. Can boost with optimum car wax. Can't imagine using a hazing type wax or sealant anymore.

No argument from me on price, that's why I said OPC is expensive. D101 cleans fine but the smell and poor rinse-ability makes it a no go for me.

D101 is nasty stuff and foams like crazy. About the only thing I use it for is to clean the BRS or presoaking micro fiber. OPC is very effective but also spendy . Needs lower dilution ratios.

ONR will drop the solid debris to the bottom of the bucket and actually make it stick there. I believe Uber will do the same. Initial testing of Ultima Acrylic seems to as well. GG rinseless floats the dirt on top so not a good fit. ONR will suspend traffic film in the mix but won't drop it...

I think capillary action helps pull dirt up into the sponge and away from the surface, but that won't happen if the sponge is too full.

Main point is to have a rinseless that will drop the dirt to the bottom of the bucket. Not sure if D114 will do that. I guess you'll find out :)

Overnight is good. Are you using uber?

I would highly recommend looking into the optimum line of products. Many multifunctional products that are easy to use and people safe. Fewer products = lower start up costs.

I believe in washing MF in water based degreaser because most detergents are not designed to remove cured sealants. Presoak with Oxiclean or some other cleaner before the wash.

Blue and Red sponges are very different. The blue is much more firm with much larger cells. The BRS is softer with very small cells. I'm sure optimum and retailers are doing well with the BRS but there is an obvious quality difference between the two. The BRS is actually softer on the paint...

I've stored ONR for many weeks as I reuse the solution over and over. No issues. Optimum has stated that biological growth can happen if contaminated via washing. Never happened to me. D114 would go bad in a week after using the GD wash method. Not sure as to why but it would always do it...

Carpro Reload mixed with Ech2o. This will refresh the “coating “ every time you clean the glass. Basic window prep is all that is needed.

Consider the HF airless paint sprayer if you don't absolutely need cordless. I use it much more than the sun Joe. You can spray ONR and then rinse with water. It's not as self contained as the sun Joe, but is more versatile. It can be used in a garage with no issues.

It comes with a foam gun type thing but it's a joke. I tried it once and never again. The unit is pretty good at rinsing and at the lowest setting is excellent for bugs because it won't harm paint. I caught it on a good sale to run distilled water and have less setup than a full PW.

The fitting on the machine itself is 22mm I believe so standard hoses should fit. The gun that comes with it has a proprietary connection so a new hose would be needed for a different gun. I only have one battery, 5 amp hour as I recall. Can't tell you about pressure differences. I usually use...

Yes I have one. What would you like to know?

Ferritic-nitro carburizing is a form of heat treat that greatly increases corrosion resistance. This is not on the metal, it is in the metal. GM has been using this for several years. If your rotors have some sort of paint finish, it is not FNC. If the paint can survive the heat of brakes, I...

Gamma seal makes lids for 2 gallon buckets.