Search results

You might want to try some tide laundry detergent. Wet the carpet and apply some liquid tide brush it in and let it dwell. Rinse and redo. You final step you could power wash Ed

I like PoorBoys World Natural Look Ed

Perfection

Excellence

The only advantage that a flex 3401 has is the speed of some correction. The GG 6" has some advantages like a 3" backing plate Flex doesn't have that ability

I use an all purpose cleaner (citrus) from Zep straight. I apply to the trim and users soft to medium bristle and lightly agitate the APC with the brush. Once done removing the residue I wash the vehicle and dry. I will use PoorBoys trim restore to keep the trim looking new. A little bit of...

Clear coat failure. Will need a repaint from a good body shop

I will write a review of the product. I like the Brazilian carnauba wax in a can. Gives a nice deep look to my Jeep Wrangler Ed

I like the microfiber pads.

:welcome: to AutoGeek. Look at the videos that Mike Philips has as they are very informative. Ed

If you want pop and the deep wet look try putting on a glaze like PoorBoys World Black Hole. It will add depth to the color. You use a light polish/finishing pad on low speed. Then seal and wax.

Looks great. Much success with your new place

If th flex took a toll then most other polishers might be worse. I have the flex and it runs smooth now that I have my technique right. I keep the pad flat and apply slight pressure. You may want to check your working area is not to large and that toy are not over extending your arms, back...

Waze will deplete your battery quickly. I use it sparingly Ed

First I am assuming that your wife is being deployed for military service. For that your wife has my upmost respect and thanks for serving and preserving our way of life. Also thank you to,you and your children for not being in her company at home and being separated. I agree working 3rd...

I would skip the claying as that is inducing additional swirls. Why not use an AIO instead. If you are gonna glaze the swirls will reappear in a short amount of time

Use a pressure washer with a foam cannon. Rinse with clean water. Wash using a good quality car shampoo that has a lot of lubricity using 2 bucket method. As far as a sealant use whatever you have available to provide some sort of protection

The 5" backing plate is a good investment. The pad listed above are good to have around but get at least 3 of each so you can change pad between panels. When you start I would avoid the compound and use a good polish with a white pad. A good over the counter polish is McGuiars Ultimate...

You are going to get a hundred different responses. Use what you want.

If your nail catches most likely the only way is wet sand or repainted. Are you using a DA polisher? If not you may want to try that to get better results. Ed