Search results

You should read Kevin Brown's article on using m205 mixed with water Sent from my SM-N920V using Tapatalk

You spray a mf or foam pad with the m205 mixture from the spray bottle. Sent from my SM-N920V using Tapatalk

Hello. Question have you tried a Kevin Brown technique for extremely soft paint. You take a 32 ounce spray bottle fill it with distilled water ans then add 12 drops of m205 to it. This seems to work well on soft paints. Kevin has an article on his Web site about the usage of this. You might...

Scholl concepts S3 gold and their white sand which spider pad Sent from my SM-N920V using Tapatalk

Buff and shine low pro pads Sent from my SM-N920V using Tapatalk

You might contact Rob at on the spot detailing. He buys it in 55 gallon drums. He might be willing to sell you some. He is in Columbia off of Maryland route 32. Sent from my SM-N920V using Tapatalk

I did a car over the weekend. I went through 6 pads on the front section alone. Hood,front bumper cover and both fenders. I tend to have a panel then switch to a new pad. I use sometime up 20 pads on 1 vehicle or even more doing a multi step buff.

Interservice not interferservice Sent from my SM-N900V using Tapatalk

CWO-5 U. S. ARMY SIGNAL CORPS. Full time army. Currently instructor at the wo interferservice career college. Sent from my SM-N900V using Tapatalk

If you are going to use a 2 part clear hence the name 2k clear. Wearing a respirator is a must. The fumes from the 2k clear are toxic to human and will damage your lungs if not out right kill you. Using 2k clear must be done with a respirator and in an extremely well ventilated area. Sent from...

Get a can of 1k clear coating paint. 2k clear will last a lot longer Sent from my SM-N900V using Tapatalk

The washer mod helps to some degree but on very complicated curved surfaces the rupes still stalls out many times. Sent from my SM-N900V using Tapatalk

Where can you get that Scholl Concepts backing plate from that has m13 threads (5/8") . Do you have a link to a site that has it with the 5/8 thread. I have only found the backing plate with M14 threads from Europe. Thanks.

What is the makeup of rupes polishes. Are the polishes dat or Smat based or a combination of both like Uber compound. Sent from my SM-N900V using Tapatalk

The Festool Shinex rap-150 is louder than the flex pe14-2. They are both very similar in design. I would recommend you find someone in your area that has one or both to see if they will let you test them out. Sent from my SM-N900V using Tapatalk

$ 3.83per gal for Diesel here. Chevy cruZE Diesel. 51MPG. Sent from my SM-N900V using Tapatalk

I don't know if this advice will help you out or not. It seems that that both my LHR15ES and LHR21ES both seem stop rotating whenever I work on a truck with curved or flailed fenders. I wind having to go back to the flex 3401VRG to do the job the correct way. On flat surfaces the rupes is...

Chemical guys has a wax for matte paints. Sent from my SM-N900V using Tapatalk

U.S. Army signal Corp Chief Warrant Officer

My Flex PE14-2 rotary would be my favorite flex power tool. Its so light and easy to manuver around a vehicle. You can get into tight spots with a 4' pad on it. Just a joy to work with.