Search results

I use it all the time after compounding, polishing. Carry a bottle with me and after work I will wipe down the whole car and apply spray sealant or gloss enhancer leaves the surface perfectly clean, will not strip a sealant and Collinite 915 not sure about other waxes. Is it worth it? Well that...

Surfs up! wheres the board dood? :cheers:

Will this prouduce a better finish than 106FF? I will finish off my order with this, hope it will last untill I get home. Save one for me please...:) :cheers:

It will take some time but it can be done and will look good. I have the Polishing Pal from Pinnacle, this little thing works wonders. Polishin’ Pal includes: 1 White Polishing Pad, 4 inches 1 Yellow Cutting Pad, 4 inches 1 Gray Finishing Pad, 4 inches 1 Blue Finessing Pad, 4 inches 2 FREE...

I think your best bet is to go with what the Sharpie site recommends - AMODEX STAIN REMOVER. Also I have used ISOPROPYL ALCOHOL avoid anything with acetone and always test for color fastness first ... :cheers:

Buy it, if you do not like it I will buy it from you. I use the purple foamed wool LC pad with Menzerna Nano P0 106FF and I will not go back to the white foam, you will not be dissapointed. :cheers:

I found the LC foam wool pad that AG has, prouduced better results. The foam works good too, truck looks real nice, good job! :cheers:

Buddhadharma :) :cheers:

I use it all the time after compounding and polishing leaves a perfectly clean suface so you can see what you missed. I also go over the whole car before LSP, I carry it with me to get the bugs off and bird crap, works well. This is not a quik detailer, quik cleaner yes. I use it during the week...

Some tips that might help : Toothpaste straight on the stain, lightly scrubbed in then wiped off Aerosol hairspray works well on tough stains, may take several swipes to get it all :cheers:

I bought the LC plates from AG, 3.5 and 6" I do not have a problem with them really noticed no increase in vibration hmmmm... :cheers:

:iagree: :cheers:

I do one pannel at a time, spread on speed 3 then 5 and work it about 5-8 min then speed 4 until you can not really see it and there is a dull shine then wipe off.The differance you will notice is clarity and gloss, but you have to work it longer than two passes. I also then put on 4* UPP goes...

Iowa Corn Indy 250 , I was bummed to see Danica get taken out :( Quad Cities :cheers:

I have been to Newton for the race :) Work in Davenport but live in Illinios Welcom to AGO! :cheers:

Ohhh I can only wish to BKK right now, will be there next year with the wife and planning one week in BKK and week or two in Khon Kaen to visit family then off to Japan for a week. Maybe we can all meet up in BKK with pspvs too as the wife will be busy during the day and I will have time to play...

tommy, yes you have some good stuff to play with for a little I just put in an order, so I was thinking next month I could send you some stuff to try out when I order again and have them just ship direct to you na Chai Yo ja :cheers:

I have the foamed wool 6.5 polishing / buffing pad just ordered 2 more, as for me they produce far better results than the foam and do not cake up at all, I use this on the UDM. I also have the Lambswool 6" leveling pad but have not tried it yet, will soon with power gloss compound and UDM :cheers:

Sawatdee Khrap, Welcome :) The UDM kit looks good, also want to add the 6 inch and 3 inch backing plates works better with the 6.5 and 4' pads. The Menzerna you may want to look at power gloss compound and Nano polish P0 106FF, another good pad is Foamed Wool 6.5 inch Polishing/Buffing Pads I...

Very nice find, looks really good. :) I was going to get the XRS but with the wife not used to shifting with her right hand and driving on the right hand side of the road, I thought better get an automatic no need for her to keep looking at the shifter Then she takes over my Jimmy and now we...